Kipp's Corals
Active Member
- Joined
- Jun 15, 2022
- Messages
- 375
- Reaction score
- 1,661
- Location
- Kinderhook
- What state or country do you live in
- New York
Okay so I got my RODI up and running. This is a two part question.
I filled a 5 gallon bucket in about an hour and 15 minutes. Seems like my output is okay. PSI 78-80 with booster pump.
Question / issue #1) My problem is my TDS reader is reading zero coming in and 0 coming out on the systems TDS reader. I oriented made sure the posts were oriented to make sure water is going through them correctly and still not getting accurate readings.
I know this because I have a $300.00 bluelab PH/TDS reader.
Leads my to question #2) My dirty water in red solo cup is reading over 200+ but my clean water is reading 90ppm. Do I need an additional DI unit, sediment, or etc.
**I do have a cullgen sediment filter at my WELL as well** <— not sure if this will help diagnose
Help! So close to getting things up and running and want my water at a perfect 0 PPM.
All filters are fresh, only a small amount of DI is color changed so it’s not needing a new filter.
Thoughts?
I filled a 5 gallon bucket in about an hour and 15 minutes. Seems like my output is okay. PSI 78-80 with booster pump.
Question / issue #1) My problem is my TDS reader is reading zero coming in and 0 coming out on the systems TDS reader. I oriented made sure the posts were oriented to make sure water is going through them correctly and still not getting accurate readings.
I know this because I have a $300.00 bluelab PH/TDS reader.
Leads my to question #2) My dirty water in red solo cup is reading over 200+ but my clean water is reading 90ppm. Do I need an additional DI unit, sediment, or etc.
**I do have a cullgen sediment filter at my WELL as well** <— not sure if this will help diagnose
Help! So close to getting things up and running and want my water at a perfect 0 PPM.
All filters are fresh, only a small amount of DI is color changed so it’s not needing a new filter.
Thoughts?
