BRS 4 stage value plus 100GPD

[TxReefer21]

I just got a new rodi unit from Brs and this thing cannot make rodi water. I know it’s slow compared to my waste mine. But the pressure coming from waste line is shooting out and my good water from blue mine is barley dripping drops. I installed a booster pump but even then it’s still doing the same thing I’m not sure what else to do

 

[ckuhny3]

I just got a new rodi unit from Brs and this thing cannot make rodi water. I know it’s slow compared to my waste mine. But the pressure coming from waste line is shooting out and my good water from blue mine is barley dripping drops. I installed a booster pump but even then it’s still doing the same thing I’m not sure what else to do

What is temp outside by you?

 

[ckuhny3]

Can you add another DI filter and eliminate some of the waste water ? Basically refilter the waste water one more time

 

[Magic031707]

Is your flush line open or close? I have the same one and mine drips from the blue line when I'm flushing the system

 

[stoney7713]

Does it have a manual flush valve on it and is it open?

 

[TxReefer21]

Is your flush line open or close? I have the same one and mine drips from the blue line when I'm flushing the system

It’s opened

 

[TxReefer21]

What is temp outside by you?

57 Texas

 

[slythy]

It’s opened

close it, you should have that restriction to create ro/di. Also whats your water pressure?

 

[TxReefer21]

Is your flush line open or close? I have the same one and mine drips from the blue line when I'm flushing the system

Only valve and I have that where the flow can go through

 

[TxReefer21]

close it, you should have that restriction to create ro/di. Also whats your water pressure?

With the valve closed almost 60-80 with it’s opened shoots to 20

 

[TxReefer21]

That’s with booster

With the valve closed almost 60-80 with it’s opened shoots to 20

 

[slythy]

Its working perfectly. So close it and you get your restriction to make water. Right bow you are flushing the membrane which you should do to keep everything happy at the beginning of each time you make water. Do it for 30 seconds at the start every time.

closed is making water. Open how you have it is flushing your membrane.

 

[TxReefer21]

Its working perfectly. So close it and you get your restriction to make water. Right bow you are flushing the membrane which you should do to keep everything happy at the beginning of each time you make water. Do it for 30 seconds at the start every time.

closed is making water. Open how you have it is flushing your membrane.

Makes sense thank you friend

 

[slythy]

Makes sense thank you friend

Let us know if that worked for you

 

[alexmara76]

When I flush the system ,I produce same quantity of water from the blue line and all the tds crap goes into my drinking water tank or DI resin, if I flush or not ,same quantity of water comes out , there is something wrong with my system ? I have the same flush valve you have from BRS
My psi is 80 , goes to 65 when I flush ,any help is appreciated