BRS Part 2 1Gal container modification

[Neo Jeo]

Hello,

I have to keep filling my doser containers. Is there a way I can turn my BRS 1 gallon jugs into the doser container?

maybe drill a hole ? How could I keep the line to the bottom? Or is there another solutioN like Getting new containers.

thanks

 

[phatduckk]

you can essentially do the same thing folks do w/ other water bottles

 

[Potatohead]

I think BRS actually has a video on this from a few years back

 

[User1]

you can essentially do the same thing folks do w/ other water bottles

I use the voss bottles :)

As noted above with the voss bottles, and also with the note above from Potatohead and the BRS video. They use the John Guest connector and 1/4" acrylic tube or hose. Either will work. Some add a reverse check valve on the top for a vent. I use a small drill bit and make a hole. Either will work. Depending on what you are dosing you may need to adjust the tube or acrylic rod inside the container since some will break down due to the contents (for example acrylic and NoPox).

 

[Neo Jeo]

Good stuff! Thanks I found the BRS ones

 

[Neo Jeo]

I use the voss bottles :)

As noted above with the voss bottles, and also with the note above from Potatohead and the BRS video. They use the John Guest connector and 1/4" acrylic tube or hose. Either will work. Some add a reverse check valve on the top for a vent. I use a small drill bit and make a hole. Either will work. Depending on what you are dosing you may need to adjust the tube or acrylic rod inside the container since some will break down due to the contents (for example acrylic and NoPox).

thanks!