Brute and phosphate issues

NeveSSL

2500 Club Member
View Badges
Joined
Jul 20, 2007
Messages
2,642
Reaction score
240
Location
Kodak
Rating - 0%
0   0   0
That would work, too. How do you have them plumbed? If at all?

Brandon
 

Greenstreet.1

5000 Club Member
View Badges
Joined
Oct 16, 2013
Messages
5,719
Reaction score
3,242
Location
Li New York
Rating - 0%
0   0   0
Was thinking about doing it with the tanks but will make it difficult to do water changes cause of my rodi setup.
 

ToXIc

2500 Club Member
View Badges
Joined
Feb 27, 2011
Messages
4,002
Reaction score
67
Location
TN
Rating - 0%
0   0   0
That would work, too. How do you have them plumbed? If at all?

Brandon

need to get a better pic.. but both drilled middle bottom fresh on top and mixing on the bottom. No pumps to move the water its gravity fed only pump is to mix the salt..

65633C3C-5940-4DB3-8CF2-BD95DAD88245-18149-00000DC2157F8F51.jpg
 

NeveSSL

2500 Club Member
View Badges
Joined
Jul 20, 2007
Messages
2,642
Reaction score
240
Location
Kodak
Rating - 0%
0   0   0
Nice! Now that I have my tank out of my garage, I need to get to work on building my support system. Gotta move my sump to the correct side of the garage and see what all I need to do. I'm planning on playing with a lot of stuff, so I'm going to try to have enough room to do a remote deep sand bed, dedicated refugium, maybe an ATS, water change station, the works, but I've got to fit it into a fairly tight space. :) We'll see.

Edit: Forgot to mention... we're going to try to get a utility sink installed in the garage. If I do, I'll be permanently plumbing a drain from the tank to do water changes... turn a valve, old water goes into the drain... close that valve and open another one, and new water drains into the system. Or something like that. :D I figure the easier I can make it to do water changes, the more likely I'll be to do them and the more likely my tank will be successful. :)

Brandon
 
Last edited:

ToXIc

2500 Club Member
View Badges
Joined
Feb 27, 2011
Messages
4,002
Reaction score
67
Location
TN
Rating - 0%
0   0   0
This is what I want to do eventually but how do you cover the tanks

i have some acrylic sheets on it now, but because the is moisture primarily on one side it has warped... so may have to find something else.. may be sintra (pvc)
 

ToXIc

2500 Club Member
View Badges
Joined
Feb 27, 2011
Messages
4,002
Reaction score
67
Location
TN
Rating - 0%
0   0   0
Take them to rick and have him glue some re enforcement bars so the acrylic don't warp

when i warms up i need to lay them out in the sun so they can flatten back out..
 

Rock solid aquascape: Does the weight of the rocks in your aquascape matter?

  • The weight of the rocks is a key factor.

    Votes: 10 8.5%
  • The weight of the rocks is one of many factors.

    Votes: 43 36.8%
  • The weight of the rocks is a minor factor.

    Votes: 35 29.9%
  • The weight of the rocks is not a factor.

    Votes: 28 23.9%
  • Other.

    Votes: 1 0.9%
Back
Top