Bryopsis? GHA?

indigoze

Community Member
View Badges
Joined
Dec 15, 2024
Messages
40
Reaction score
16
Location
Texas
Rating - 0%
0   0   0
Hi all, I have a new problem in my tank. Seems that there is always a new problem for me

This nasty algae has started to appear in multiple places. It's very firmly attached to the rocks and plugs and can't be pulled off only trimmed. Is it bryopsis or gha?

For my next question I'm leaning towards fluconazole to get rid of it, but I have a lot of macros that I don't want to kill. I see some people saying they're fine, others say they die. Other than the caulerpa I don't recall the name of them but you can see them in the pics.

The nuisance algae in question is visible in pic 1 on the zoas and in pic 3 on the rocks but clumps of it are all around the tank.

Advice please

Btw water tests are all good no spikes of anything.

PXL_20250321_232531564.jpg PXL_20250321_232551287.jpg PXL_20250321_232536794.jpg PXL_20250321_234638559.jpg
 

JTP424

2500 Club Member
View Badges
Joined
Jan 10, 2022
Messages
2,762
Reaction score
3,195
Location
US
Rating - 0%
0   0   0
I'd say bryopsis but close up images would help. I would remove the macros to ensure they survive
 
OP
OP
I

indigoze

Community Member
View Badges
Joined
Dec 15, 2024
Messages
40
Reaction score
16
Location
Texas
Rating - 0%
0   0   0
Are the any critters that may eat the stuff? I have snails and an urchin but they don't seem interested in it.
 
OP
OP
I

indigoze

Community Member
View Badges
Joined
Dec 15, 2024
Messages
40
Reaction score
16
Location
Texas
Rating - 0%
0   0   0
So I have added this fluconazole product https://a.co/d/02Aq9LC at the recommended dosage 4 days ago and I see zero change. If anything the zoa's are more covered than they already were. It said to use 1 pill per 10 gallons so I used 1.5 since it's almost a 20 and accounting for the rocks and sand. No effect on fish or inverts that I can tell. Should I add more or just wait?

I'm very uncomfortable having the carbon and purigen out of the system, as it has always had them since I started the tank back in October. Being testing water daily no changes. Also no effect on the caulerpa and a few sprigs of red macro of some kind that I couldn't remove. I placed all the other macros in a heated bucket with a pump and the old light I had when I started the tank. Also threw the carbon and purigen bag in there with them.
 

fish_collector

Valuable Member
View Badges
Joined
Jul 24, 2021
Messages
1,292
Reaction score
2,671
Location
USA
Rating - 0%
0   0   0
With a pic that lacks great detail and all, that sure does look like bryopsis. It's fern shaped and will grow in clumps and as you found out it is nearly impossible to pull it out. GHA on the other hand usually does not grow in clumps, it will grow like grass in larger areas that face the light. Fluconazole will kill bryopsis but it takes a few weeks. It is somewhat effective on GHA but the dose needs to be higher and you have to leave it in the system for longer, weeks and weeks for sure, and leave the carbon out for the duration you want the fluconazole to stay active. It is ok to redose it after a few weeks. When you put the carbon back in use 1/3 or 1/2 as much so the zoas aren't light shocked, carbon will clear up yellowed water almost overnight.

I just did a fluconazole treatment in my fowlr to try and clear out some stubborn GHA. It was partially effective. What I have found is the newest GHA doesn't attach as well as it used to and is fairly easy to siphon out. I'm thinking another treatment may be necessary to eliminate it completely. It was great for a while though, I had literally nothing that grew on the glass for at least a month :face-with-tears-of-joy:
 
OP
OP
I

indigoze

Community Member
View Badges
Joined
Dec 15, 2024
Messages
40
Reaction score
16
Location
Texas
Rating - 0%
0   0   0
So I simply wasn't patient enough lol. Today the patches of whatever algae they are, aren't looking well at all. No longer plump and bushy, but limp or collapsing and quite pale at the ends. This has progressed throughout the day and they look positively terminal now🤣 I even saw a few pieces detach and float away sucked into the filter. Still zero effect on my overgrown caulerpa which I'm ok with. Pic 1 is this morning and Pic 2 is a minute ago. Please excuse my goby photo bombing. He thinks I'm gonna feed again.
 

Attachments

  • PXL_20250403_193413336.MP.jpg
    PXL_20250403_193413336.MP.jpg
    249.3 KB · Views: 66
  • PXL_20250404_004041313.jpg
    PXL_20250404_004041313.jpg
    271.7 KB · Views: 60

painter1982

Valuable Member
View Badges
Joined
Jul 19, 2025
Messages
1,080
Reaction score
878
Rating - 0%
0   1   0
So I simply wasn't patient enough lol. Today the patches of whatever algae they are, aren't looking well at all. No longer plump and bushy, but limp or collapsing and quite pale at the ends. This has progressed throughout the day and they look positively terminal now🤣 I even saw a few pieces detach and float away sucked into the filter. Still zero effect on my overgrown caulerpa which I'm ok with. Pic 1 is this morning and Pic 2 is a minute ago. Please excuse my goby photo bombing. He thinks I'm gonna feed again.
How did this end? Any harm to corals? Did the bryopsis go away permanently?
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 34 27.4%
  • 100% dry rock + 100% live sand

    Votes: 44 35.5%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 27 21.8%
  • 75% live rock, 25% live sand

    Votes: 11 8.9%
  • 25% live rock, 75% live sand

    Votes: 8 6.5%
Back
Top