Building From Scratch

Finished up the one button push for feed mode controlling the powerheads, return pump, and UV light. powerheads are off for 5 min. , the UV and return pump are off for 10 min.

20260511_081017.jpg
20260313_162159 (1).jpg
20260313_162043.jpg
Well done, Jimmy!
 
Made a few changes to my dosing pump, besides the regular calibration about every month, I went back to the supplied tube holder because the other is best suited to my 20G upgrade lid. Its temporary since this holder tends to clog easy. Will say I am very pleased with the Kamoer pump. has maintained calibration since install.

20260606_135356.jpg
20260606_135424.jpg
20260606_135440.jpg
 
this zoa is doing good, I don't feed zoa's directly. They must be catching stuff from the water, I feed frozen foods exclusively
jan. 13th 2026
20260113_114814.jpg


yesterday

20260620_111550.jpg
 
Last edited:
New episode of Red Neck Engineering show : Well, back about a year and half ago, i pulled my Chato out of my sump. It survived quite well in a bucket that received water change water from my tanks. I eventually threw it out thinking i would never need it again. Based on an spur of the moment invention, yes a red neck invention to make it easier for a friends wife to reach and change ice bags in a sump for a temperature compromised tank area. I present to you the mobile chato reactor. Trust me, I will only use it when I am here.

Its a 5 gl bucket set up for a small pump to pump water into it, and flow down over the chato and the back out an over sized drain (what i had on hand). I am going to set the pump to pull water from just under the surface of the sump and the inlet and drain are set up to prevent siphon of the bucket water. This set up would would work great for chilling the tank water with ice bags in the bucket also if needed. My Finnex sump light I had fits the bucket perfectly. I used an old container i made when messing around with acrylic , I made the openings at the bottom for water flow. the s[acer on the bottom is temporary, the top piece just sits on it.

20260807_151351.jpg



inlet and outlet are at the same level, to prevent siphoning of the bucket water in case of power outage.

20260807_151141.jpg



this clamp will not be used, looking for an all plastic alternative

20260807_151122.jpg



my sump light fits great, this can be used as needed and i can keep chato just fine without it being on a tank. also for everyone growing phyto, chato loves F2 fertilizer, just rinse the chato in fresh saltwater before using on a tank.

20260807_151628.jpg
 
I guess the clam that is on one of my Turbo snails is still alive, hard to tell. If you are reading this, head over to the giveaway threads for a chance at a large Tunze return pump. check it out here Turbelle Flow Jet 5600

20260807_161808.jpg
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new