Can't get ro-di water to zero

Joewestwood

New Member
View Badges
Joined
Jun 21, 2019
Messages
19
Reaction score
2
What state or country do you live in
Kansas
Rating - 0%
0   0   0
Hey friends,

Just changed everything out of my 4 stage brs ro-di with new filters and can't get the tds below 4. I've made about 30 gallons and have packed the di resin super tight.

Thoughts?
 
You may want to consider a booster pump. It improves membrane rejection performance.
 
Me either, 3-4ppm, best I can do.
But this can just be testing error, I doubt anything 5 and below is of any real concern.
Been making 3-4ppm RODI for 30 years, never caused any problem whatsoever.
6E864D5A-C0E6-48C3-8542-C19CABF21275.jpeg
 
So I ran into this issue and did the same thing you did. My random and totally not scientific fix was, I unscrewed the di resin canister and the screwed it back on, then in less than a minute the tds went to zero.
 
I get 0 to 1 tds from 150 tds tap water with a spectrapure select plus membrane. I use a booater pump which gets the pressure to about 80psi. I dont use deion as 1 tds is not a concern.
 
Take the membrane out, check the seals, re-seat it 'firmly', then try again.
Could be bypassing
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.8%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 24 36.4%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new