Hey Randy! I was wondering if you know if a recirculating CO2 scrubber raises the pH of the tank more than the normal CO2 scrubber. I was also wondering which CO2 scrubber you suggest and what is the best CO2 scrubber media for a high pH increase.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Randy! I was wondering if you know if a recirculating CO2 scrubber raises the pH of the tank more than the normal CO2 scrubber. I was also wondering which CO2 scrubber you suggest and what is the best CO2 scrubber media for a high pH increase.
Thank you and is there a difference between scrubber media brands or are they all the same, I heard kalkwasser had different qualities so I thought maybe the media also has thatI'm not a fan of fully recirculating skimmer scrubbers as they eliminate one use of a skimmer: oxygenation.
They might reduce pH more or less than a single pass, depending on how much CO2 is removed from the water and added to the air with each pass.
More folks report a bigger pH lowering with recirculating, but that's not necessarily always the case, and I'm also not certain if that is not simply a moisture effect.
Thank you and is there a difference between scrubber media brands or are they all the same, I heard kalkwasser had different qualities so I thought maybe the media also has that
Thx I'm excitedBeginning of this week I’m receiving all my parts for a recirculating skimmer triggered to pull ambient air via a motorized ball valve. I’ll likely program apex to open valve (ambient room air) when pH > than 8.3ish and close (recirc air) when pH < 8.2 I’ll report back on how well it works for me.
But does the pH decrease compared to the standard CO2 scrubber? I'm all about ph. If my pH was 12 I would be happy (just kidding)I run my scrubber as a recirculated system, however, I have a hole drilled in the lid of the skimmer cup so it mixes with ambient air as well. Recirculating without a doubt extends the life of the media. I recently switched to brs media and it seems to be working well for me so far. You can also find it pretty cheap online, the most common brand is JorVet. You can find it on Amazon and also veterinary supply companies.
Without my scrubber my ph hung about 7.9-8. Running it as I described with the brs media it hangs around 8.2-8.3. Decent enough increase for me. Drawing the air from the cup adds moisture and having the hole in the lid lets some ambient air mix as well. These days I've been getting 3-4 weeks out of the material. I don't bother addressing ph any more than the scrubber.But does the pH decrease compared to the standard CO2 scrubber? I'm all about ph. If my pH was 12 I would be happy (just kidding)
Thx for the posts. I am struggling to keep co2 scrubbing media dry. Just went through desiccant in 1 day. Seems like a waste. Considering disconnecting the recirculating cap and going old school.Without my scrubber my ph hung about 7.9-8. Running it as I described with the brs media it hangs around 8.2-8.3. Decent enough increase for me. Drawing the air from the cup adds moisture and having the hole in the lid lets some ambient air mix as well. These days I've been getting 3-4 weeks out of the material. I don't bother addressing ph any more than the scrubber.
Thx for the posts. I am struggling to keep co2 scrubbing media dry. Just went through desiccant in 1 day. Seems like a waste. Considering disconnecting the recirculating cap and going old school.
Dessicant?
Now I’m confused, lol. What is your Poseidon?That’s odd. I thought we used a mix of Kalk in the pellets, how would that pull co2? I use that for my Poseidon.
Now I’m confused, lol. What is your Poseidon?
FWIW, if you get to a state where you are dosing enough Kalk to keep up with a high rate of Alkalinity consumption, CO2 scrubbers are probably not required.
Note, pretty sure CO2 scrubber media is basically Kalk + sodium hydroxide ((maybe a little potassium hydroxide) if used as a rebreather, anaesthetic doodah.)
What’s your alk at when your ph is north of 8.5? Can’t imagine ph naturally running that high without those ph boosting additions to hold it there?I just use a normal CO2 scrubber nowadays. My pH is went from 8 to 8.3 and with my reef zlments ph plus my pH is about 8.6 sometimes higher it is very stable
That’s odd. I thought we used a mix of Kalk in the pellets, how would that pull co2? I use that for my Poseidon.