CO2 SCRUBER MEDIA

[ReeferWarrant]

Yea, made same mistake. Good stuff wrong vendor.

Canceled my order and ordering from medvet, thanks for the heads up everyone!

 

[jose hernandez]

K will look into it thnks

 

[raultsu]

I’ve been using the TLF stuff for about 4 weeks and it still not depleted

 

[jose hernandez]

Mines depleted 2 much so added a hose to the skimmer ran outside by my wi die and addded a Refugium 8.0 to 8.1 at nite 8.3 to 8.4 when the lights are on

 

[Adamantium]

Did you put a valve on it that stops when water goes through? I'm thinking about doing a DIY build with normal air hose and have some of those valves handy.

Can you clarify what kind of valve you’re talking about? I’ve never heard of this kind of valve.

 

[Larry L]

Did you put a valve on it that stops when water goes through? I'm thinking about doing a DIY build with normal air hose and have some of those valves handy.

Can you clarify what kind of valve you’re talking about? I’ve never heard of this kind of valve.

Sounds like maybe an airline check valve?

 

[ReeferWarrant]

@Adamantium, I was thinking what @Larry L mentioned, but in second thought it just stops air from going one way. It wont help with this setup, because you want the air to go to the scrubber media.

 

[BiggestE222]

What type of scrubber are you using? I'm building a DIY one and wondering if I should just bite the bullet and buy the one off of BRS.

The IceCaps are really nice. I have a small and medium one that I daisy chain. Are in bottom to add water. I just jam paper towels in to dry after washing out old media. Keeps my PH at 8.2-8.4. Change every week so I might buy the messer 5 pound from Amazon.

 

[BiggestE222]

Oops this is the way to go

 

[BiggestE222]

Canceled my order and ordering from medvet, thanks for the heads up everyone!

Yeah I will buy from them.