Controller Advice

  • Thread starter Thread starter gcrawford
  • Start date Start date
  • Tagged users Tagged users None

gcrawford

Valuable Member
View Badges
Joined
Sep 25, 2012
Messages
1,027
Reaction score
429
Location
Huntsville, AL
Rating - 0%
0   0   0
My heater controller died so I was looking into a replacement. In my search I found some that were not really impressive and did not look reliable. I have timers for my wave pump (Jebao), my refugium light and kalk reactor. So for a little more $$ I could get an entry level Reefkeeper that controls 4 devices. I also came across the Apex Jr which does about the same thing plus has internet monitoring/control which would be really neat as well.

Does anyone have any advice, pros and cons about either unit? Or possibly another that I have not considered? I'm trying really hard to stay around $200 if possible. Also, I've noticed quite a few reefkeeper items for sale on other forums that have a module that doesn't work any more so I'm a little hesitant to go with that one.

Any thoughts and advice would be appreciated.

-g
 
I bought a used aquacontroller 3 with 2 of the 8 bar pc outlets for about $250. Well worth every penny I spent. It has the Internet control and I have it set up on wireless. I had 3 channels on the outlets go out but who knows how old this unit is and is still running great.
 
If you are willing to go 200 you may as well spring for the neptune jr. It's the best heater controller you can buy with internet control and alerts, will also control a chiller, and do just about anything else if you continue to upgrade it.
 
I have the Apex Lite (new, full price) and it has saved me many times (after I got the programming and sensors setup right :squigglemouth:). The controls are easy to use, the modules are plug and play, the mobile apps are great and the programming is easy to learn.

With that said, when setting up the controller for a heater, set it a degree or higher and lower than what you want it to be. This will keep the controller from constantly kicking the heater on and off when there is a slight change in temp.

I did a bunch of research before I bought the Apex and I can tell you that both controllers are great, it is really up to preference.

If you could hold off on buying a controller, and just buy another heater, I would wait and watch out for this (no affiliation):

Bluefish LED Lighting Controller is inching closer to reality

They are first developing the LED controller, but then they are going to move into other object controllers.

Just my frozen 2 cents.


Also, yes...I am still alive, just quiet on the forums.
 
Nice write up and advice, thanks. I'm on a backup heater now, so it's not a huge emergency. It's looking like a Neptune Apex at the moment - gotta save for it though.

Thanks for all the replies!
 
With that said, when setting up the controller for a heater, set it a degree or higher and lower than what you want it to be. This will keep the controller from constantly kicking the heater on and off when there is a slight change in temp.

Check out the "defer" command to prevent your heater from flipping on and off with spurious temp fluctuations. Then you can set it for nice tight control right where you want it.
 
I'm using the reef angel. It comes with a wizard to help setup the most basic functions. If you need something more custom, Roberto, on the forums over there, can code up anything you'll need. They are also always coming out with new gizmo's to help control stuff.
 
I can only speak for the full blown APEX, but I think they are fantastic. It makes keeping a stable tank much easier. If you are handy and semi-technical, talk to H@rry and build your own. It will save you a few bucks.
 
I'm using the reef angel. It comes with a wizard to help setup the most basic functions. If you need something more custom, Roberto, on the forums over there, can code up anything you'll need. They are also always coming out with new gizmo's to help control stuff.

+1 on reef angel.. I like mine a lot..
 
Thanks guys for the suggestions..... BTW JSB, the birds nest frag you gave me last year is now the size of a cantaloupe. The little leather is about the size of a silver dollar, still healthy. Thanks again!
 
2.5 months after the heater controller died, I finally settled on the Apex Jr. Got it used for a good price with no display (which was not important to me since I have an iPhone or iPad with me most of the time). So far I like it a lot, it's controlling my wave pump, heater, fuge lights/stir pump and kalk reactor. Time will tell!

-g

ImageUploadedByREEF2REEF1398551721.914678.jpg
 
2.5 months after the heater controller died, I finally settled on the Apex Jr. Got it used for a good price with no display (which was not important to me since I have an iPhone or iPad with me most of the time). So far I like it a lot, it's controlling my wave pump, heater, fuge lights/stir pump and kalk reactor. Time will tell!

-g

ImageUploadedByREEF2REEF1398551721.914678.jpg

Congrats. You won't regret going with Neptune! I like knowing that if anything goes wrong (parameters out of wack, leaks, power outage...battery backup, etc), I'll get an email and a text message.
 
Thanks! Loving it so far, it's been flawless.... I really like seeing the history report that shows everything switching on time and my temperature fluctuations - which are now pretty steady compared to before with the heater tstat.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new