Cord management.

[ryan32.rc]

Wasn't sure where to post this but.I ve seen a few people wire the cord raceway or whatever it is called.Was just wondering where to get it and what it is actually called.Thanks [emoji2]

 

[singleshot]

Something like this?


http://m.homedepot.com/p/Wiremold-Legrand-5-ft-CordMate-II-Channel-White-C50/202264865

 

[ludnix]

I've seen these slotted wire ducts used in a lot of builds lately:
https://www.google.com/webhp?source...&espv=2&ie=UTF-8#q=slotted+wire+duct&tbm=shop

 

[FLSharkvictim]

My control panel for my APEX and cords. The custom cut pcs of plywood will go inside of a cabinet that will sit right next to my display..

 

[Bluefish9]

Are you talking about "panduit"?

If so, here ya go:
https://www.startech.com/m/Cables/S...inch-Open-Slot-Wiring-RacewayDuct-w-Lid~AD2X2

 

[Mike_J]

Cord management = the bane of my reefing existence

 

[FLSharkvictim]

Almost have my Apex control panel completed! I just need to mount my TUNZE pump controller, Skimz Protein Skimmer controller and my Ecotech M1 pump controller and this project will be completed and ready for hook up. I bought the salinity probe with the #PM2Mod and for my Leak Detector, I got the #ALDMod with 3 Low-Profile Advanced Leak Detection Probes that will sit around the sump.. Also, I WILL have 2 webcams streaming, one pointing in the sump area and one inside of the tank ones the new Coralvue's 720P get released.

 

[ludnix]

Looking good FLSharkvictim! Do you have a build thread I could follow?

 

[Daniel@R2R]

Cord management = the bane of my reefing existence

YES!! I seriously wish someone would start building and selling these organization boards!! @mixer911 @geo @Floyd R Turbo @ArtFully Acrylic #ANYONE

 

[Turbo's Aquatics]

Are you talking about "panduit"?

If so, here ya go:
https://www.startech.com/m/Cables/S...inch-Open-Slot-Wiring-RacewayDuct-w-Lid~AD2X2

This stuff is the bomb

 

[mixer911]

No standard option would work for anyone person. Everyone has so many different setups and configurations that it would be hard to narrow down a few models. It would have to be purely custom.

This is how we did ours.

 

[Daniel@R2R]

Yeah. I just wish there was someone who made them. I lack the time and skills (or time to develop the skills) to build a cool equipment board.

 

[Brew12]

Yeah. I just wish there was someone who made them. I lack the time and skills (or time to develop the skills) to build a cool equipment board.

I think you are selling yourself short. To make a nice looking board isn't too hard. All you really need is a board, a drill with a hole saw, and some desk grommets. That gets you 90% of the way to a simple yet clean looking board.

 

[FLSharkvictim]

By all means, I am not handy at all so if I can do it, anyone can do it! You need to find a 10 gallon Nano stand like I did and buy a pcs of 1'' plywood and make your rips.
I bought the Oval Grommets off ebay and you will need some two sided tape guys and that's about it. Ones everything is hooked up, I will create a build thread... Now I am building my saltwater mixing station....

 

[BigAsh]

I used the Startech referenced above. Be sure to go big. The one in my controller alcove is 3"x3". I used a 2"x 1" behind my sump to carry wires into the controller alcove.

 

[geo]

YES!! I seriously wish someone would start building and selling these organization boards!! @mixer911 @geo @Floyd R Turbo @ArtFully Acrylic #ANYONE

You called?
Let me know when your ready I got your BOARD

 

[Daniel@R2R]

You called?
Let me know when your ready I got your BOARD

Woot!! I will be contacting you shortly!!

 

[Jonty]

You called?
Let me know when your ready I got your BOARD

How do we order can I send modules and equipment to enclose and you can build?

 

[geo]

How do we order can I send modules and equipment to enclose and you can build?

If it is all Neptune and Ecotech I already have them. Lmk. If not u can send in.

 

[Jonty]

yes all Ecotech and Neptune, I also want an enclosuree made for my new KH monitor, can I pm you or?