Critique flow options

[lacrosseboss18]

My tank crashed and I'm planning to redo it and have an SPS dominant tank.
Tank is a 225g (72x27x27) with center overflow. 2x 3/4 returns.

I was thinking
1) 2 mp60s one on each side
2) 1 mp 60 and a gyre on the opposite end (not sure which one)
3) 4 wavs one each side and 2 on the back
4) combination of mp40s or wavs with the above options

Thanks

 

[Ty Hamatake]

Four MP40s, two on each side offset from each other :)

 

[maroun.c]

4 MP40 one on each side and 2 on the back might be enough. if you have the budget then Mp60s one on each side and 2 MP40s on the back.
suggest to link your Vortechs to a controller and have it switch to different modes on different days for more redundancy.

 

[Ty Hamatake]

4 MP40 one on each side and 2 on the back might be enough. if you have the budget then Mp60s one on each side and 2 MP40s on the back.
suggest to link your Vortechs to a controller and have it switch to different modes on different days for more redundancy.

Even fancier!

 

[lacrosseboss18]

Ok I like that Idea. Only reason i tossed in the Gyre is so there is more viewing space on the one side i will be able to see. tank is gonna really only be view-able from 2 sides. Front and right side.

 

[maroun.c]

In this case might be ugly to add an MP 40 on right side

 

[BoomCorals]

Four MP40 if that's the route you're looking at. Or four apex WAV would work as well.

 

[lacrosseboss18]

I tried the 4 wavs and wasn't thrilled. Maybe it was my setup of them

 

[BoomCorals]

I tried the 4 wavs and wasn't thrilled. Maybe it was my setup of them

I went though two MP60 then 4 mp40 then two gyre xf250s and finally 4 jebao sw15. Still using the jebao