Design Question...

  • Thread starter Thread starter Dom
  • Start date Start date
  • Tagged users Tagged users None

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,882
Reaction score
8,331
Location
NY
Rating - 0%
0   0   0
I need to design a stand. It must accommodate a display tank footprint of 12" x 48". The tank I am using for a sump has the same footprint.

If I construct the stand to the footprint of the display tank, I won't be able to get the sump in place under the display. The opening will be to small as the width of the legs will take up 3 inches on each side.

In order to get the sump in place, I need 48" between the legs, making the entire length of the stand 54". This isn't a problem except...

Now I have a footprint on top for the display which is 6" too long (3" on each side). I can center the tank, but now do I finish the open space between the tank and the stand's edge?
 
Top the stand with 3/4 inch plywood or, if you don't want to do that, simply put in cross supports where the tank sides will sit.
 
Top the stand with 3/4 inch plywood or, if you don't want to do that, simply put in cross supports where the tank sides will sit.
I agree with 3/4” plywood and cross braces. Then finish it to look good. You will appreciate the extra space to set testers/test kits on and other things.
 
Most stands have an open back which allows the sump to be placed from behind
 
Top the stand with 3/4 inch plywood or, if you don't want to do that, simply put in cross supports where the tank sides will sit.

I wasn't planning on plywood on top, just supports at the tank edges. This normally isn't a problem because the tank takes up the entire area of the stand. My question is more of an aesthetics question. Just wondering how I can finish it off or perhaps build the stand differently?
 
I agree with 3/4” plywood and cross braces. Then finish it to look good. You will appreciate the extra space to set testers/test kits on and other things.

Yes... thats the problem... I know it will always be cluttered with junk. ;)
 
I wasn't planning on plywood on top, just supports at the tank edges. This normally isn't a problem because the tank takes up the entire area of the stand. My question is more of an aesthetics question. Just wondering how I can finish it off or perhaps build the stand differently?
You could build the stand larger and then do the cross braces for the tank, so it is supported. Then just use some 3” strips of wood to dress out the top.
 
You could build the stand larger and then do the cross braces for the tank, so it is supported. Then just use some 3” strips of wood to dress out the top.

Yes... I was thinking about tile.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 22 24.4%
  • I’d trust someone who knows my tank to choose

    Votes: 8 8.9%
  • I’d rather get a gift card and pick it myself

    Votes: 35 38.9%
  • I’d prefer gear or supplies instead

    Votes: 2 2.2%
  • Please don’t surprise me with livestock

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new