Difference between Tunze 9430 skimmers versions

exnisstech

Grumpy old man
View Badges
Joined
Feb 11, 2019
Messages
21,239
Reaction score
34,671
Location
Ashland Ohio
Rating - 0%
0   0   0
The current model is 9430.005 with a non DC pump. I'm finding a reputable retailer that has the 9430 DC listed as 9430.001. I assume the last digit is a version number so 5 is the newest but why the switch from a DC to a non DC pump? Main reason I'm asking is because I can get the 001 version for about 2/3 the price of the 005. @rvitko can you assist?
 
I only see the new model 9430 with the new-style pump listed at tunze.com. The price point is higher than the older models, at least according to my recollection. (The phat new pump accounts for the difference. Similar to the Stream 3 pump, a mag-lev bearing, dead-silent operation are at least a couple of the pro's for the new pump.)

If you're looking at the older models make sure they are actually available vs just being listed. I've seen quite a few online listings claiming "in stock" that were not really in stock. I think they've been out of the channel for a while at this point...some of them were only "in stock" as a drop ship in the first place. The older models had both AC and DC pumps available, but both were conventional style pumps.
 
I only see the new model 9430 with the new-style pump listed at tunze.com. The price point is higher than the older models, at least according to my recollection. (The phat new pump accounts for the difference. Similar to the Stream 3 pump, a mag-lev bearing, dead-silent operation are at least a couple of the pro's for the new pump.)

If you're looking at the older models make sure they are actually available vs just being listed. I've seen quite a few online listings claiming "in stock" that were not really in stock. I think they've been out of the channel for a while at this point...some of them were only "in stock" as a drop ship in the first place. The older models had both AC and DC pumps available, but both were conventional style pumps.
Premium aquatics shows the early DC model available and they're stock is usually accurate. I'm wondering if the newer one is actually enough better to be worth the extra expense. We're talking $1000 vs $1500
 
I would get the new one. Its a considerable improvement. The old one used a Sicce pump, they aren't the quietest. The new pump is a Stream 3, they are very quiet, low maintenance and durable and the new drain system is exceptionally nice. We quit making the old model in February so its possible one is available but I am skeptical.
 
If you have the money get the new version.
I purchased my 9430dc new 8 years ago. Its still running. I bought 2 used for a good price.
Been running Tunze for a long time now. I run 2 9430dc's and 2 9410dc's.
I just took one 9430 and converted it to a venturi. I was dripping kalk over the pump and killed it. Stupid I know as I know better.
Also did the same on a 9410.
Check my 112 build for an update. Going to get them tested soon.
20261113_115255.jpg
20261113_115209.jpg
 
I am intrigued, just so you know you can still get all the parts for these, including pumps. My main interest is that generally, venturis make less and larger bubbles and the pumps likely will have higher water flow, it will be interesting to see how these work, my suspicion is that adjustment will be difficult. I kind of did the opposite a long time ago and tried to turn a red sea berlin into a needlewheel but it was a much bigger hack job as the base of the skimmer had broken off so essentially I had a body with a glued on acrylic base and a collection cup. Needless to say, it marginally worked, at the end, for all the effort, the larger airstone skimmers of the day performed better.
 
I am intrigued, just so you know you can still get all the parts for these, including pumps. My main interest is that generally, venturis make less and larger bubbles and the pumps likely will have higher water flow, it will be interesting to see how these work, my suspicion is that adjustment will be difficult. I kind of did the opposite a long time ago and tried to turn a red sea berlin into a needlewheel but it was a much bigger hack job as the base of the skimmer had broken off so essentially I had a body with a glued on acrylic base and a collection cup. Needless to say, it marginally worked, at the end, for all the effort, the larger airstone skimmers of the day performed better.
I tried the 9430 with the smaller pump that is now on the 9410.
It produced alot of very fine bubbles but was not strong enough so I went to a larger one I had in stock. Should work on the 9410.
If it is not a success I will buy the 9430dc pump.
Biggest difference between the 9430dc and the 28" LifeReef is the type of skim they produce.
9430 is heavy and dark.
The LR produces a thick pasty sludge.
 
I am intrigued, just so you know you can still get all the parts for these, including pumps. My main interest is that generally, venturis make less and larger bubbles and the pumps likely will have higher water flow, it will be interesting to see how these work, my suspicion is that adjustment will be difficult. I kind of did the opposite a long time ago and tried to turn a red sea berlin into a needlewheel but it was a much bigger hack job as the base of the skimmer had broken off so essentially I had a body with a glued on acrylic base and a collection cup. Needless to say, it marginally worked, at the end, for all the effort, the larger airstone skimmers of the day performed better.
Here is the start. You can follow on my 112 build thread. So far looks promising. Will see what it looks like in a few days.
20261116_110431.jpg
20261116_113852.jpg
20261116_112832.jpg
20261116_113653.jpg
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 33.3%
  • I decorate AROUND the tank or stand

    Votes: 1 33.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 1 33.3%
  • We don’t decorate for the holidays

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new