DIY Alkatronic reagent

erky · Apr 20, 2020

Mhart032 said:
Was this for the true alkatronic reagent 1L?

this is the same potency they sell,

LabChem LC256804 Sulfuric Acid, 0.1N

Mhart032 · Apr 20, 2020

oh wow, i just paid that for 1l of reagent. doh! should have followed this thread a little better.

Sisterlimonpot · Apr 20, 2020

erky said:
this is the same potency they sell,

LabChem LC256804 Sulfuric Acid, 0.1N

I'm confused, maybe someone can clarify. I thought the 0.1N did NOT need to be diluted. Can someone verify this for me?

GoVols · Apr 27, 2020

Sisterlimonpot said:
I'm confused, maybe someone can clarify. I thought the 0.1N did NOT need to be diluted. Can someone verify this for me?

Bump!!

Is it ready to use, or do you mix it, 1 part to 4 parts of RO/DI?

GoVols · Apr 27, 2020

erky said:
back in stock now

Thanks!!

One 4L jug is on the way.

Anchor · Apr 27, 2020

GoVols said:
Thanks!!

One 4L jug is on the way.

Hmmm.. You must use a different Amazon than I do. I just did an Amazon search and no sulfuric could be found of any kind and its less than 8 hours since you posted this. Best I can find is a 1 liter 0.1 n hydrochloric.. You had to have gotten the only bottle...

Randy Holmes-Farley · Apr 28, 2020

Anchor said:
Hmmm.. You must use a different Amazon than I do. I just did an Amazon search and no sulfuric could be found of any kind and its less than 8 hours since you posted this. Best I can find is a 1 liter 0.1 n hydrochloric.. You had to have gotten the only bottle...

I see lots of them in the USA.

For example:

Amazon product ASIN B07JBNJL3L

GoVols · Apr 28, 2020

Anchor said:
Hmmm.. You must use a different Amazon than I do. I just did an Amazon search and no sulfuric could be found of any kind and its less than 8 hours since you posted this. Best I can find is a 1 liter 0.1 n hydrochloric.. You had to have gotten the only bottle...

13 jugs still left / but wonder if each state in the US has different laws???

Edit:
It still shows up for a St Paul zip code

Anchor · Apr 28, 2020

GoVols said:
13 jugs still left / but wonder if each state in the US has different laws???

Edit:
It still shows up for a St Paul zip code

Still not showing up for me.. wonder why that is.. ?

Randy Holmes-Farley · Apr 28, 2020

Anchor said:
Still not showing up for me.. wonder why that is.. ?

Guess Minnesotans are not to be trusted. lol

Anchor · Apr 28, 2020

Randy Holmes-Farley said:
Guess Minnesotans are not to be trusted. lol

Only Sconnies are worse... :)

erky · Apr 28, 2020

acid link

still showing for me, i am not in mini soda

erky · Apr 28, 2020

duplicate

Mhart032 · Apr 28, 2020

works for me too, but it says i cant buy more than 5 of them.

Anchor · Apr 28, 2020

after several attempts typing in the string you provided, I finally copy and pasted.. LO and BEHOLD. it showed up..

erky · Apr 29, 2020

there is an easier way to make reagent, that is this HCL. Way cheaper but to each their own. I am not sure if the exact formula has been posted here or not. The one i was messing with was a bit off like .3 dkh different than the .1N solution.

Orly20 · May 2, 2020

Hi Guys

I hope you can help!
I’ve made batch of reagent but I goofed in the mixing and it’s concentration is a bit different. I am using this solution method below:

The 0.1N sulfuric acid from Amazon, throw a 1L and 250ML volumetric flask into your cart as well!

my readings were coming in at 8.08 from the previous batch and my Hanna was reading 7.6 which is close enough for me. It is now measuring high levels like 11.2 with the new mix goofed batch.
I wouldn’t like to toss the mixture out but can I add more RO or do I need to add more Sulfuric Acid to bring the numbers down closer to where I want them????

I appreciate your time and help
Thank you

Sisterlimonpot · May 2, 2020

Orly20 said:
Hi Guys

I hope you can help!
I’ve made batch of reagent but I goofed in the mixing and it’s concentration is a bit different. I am using this solution method below:

The 0.1N sulfuric acid from Amazon, throw a 1L and 250ML volumetric flask into your cart as well!

my readings were coming in at 8.08 from the previous batch and my Hanna was reading 7.6 which is close enough for me. It is now measuring high levels like 11.2 with the new mix goofed batch.
I wouldn’t like to toss the mixture out but can I add more RO or do I need to add more Sulfuric Acid to bring the numbers down closer to where I want them????

I appreciate your time and help
Thank you

I've done this many times in my "shade tree" attempt to reverse engineer and find a cheaper acid.
Based on your test result, your mix of reagent seems to be too diluted and would need more acid.