diy iron and manganese supplement

  • Thread starter Thread starter Swip
  • Start date Start date
  • Tagged users Tagged users None
If there is some reason to use manganese glycinate instead of any of the others (which is fine), here's a recipe:

Manganese glycinate (= manganese bisglycinate) is 27% manganese by weight.

Dissolve 1 gram of the solid material in 1 L of RO/DI. That solution contains 270 mg of manganese, so the concentration is 270 mg/L or 270 ug/mL.

Adding 1 mL to 100 L of tank water will boost aquarium manganese levels by 270 ug per 100 L or 2.7 ug/L.
 
For the zinc sulfate, dissolve 1 gram of the solid material in 1 L of RO/DI. That solution contains 400 mg of zinc, so the concentration is 400 mg/L or 400 ug/mL.

Adding 1 mL to 400 L of tank water will boost aquarium zinc levels by 400 ug per 100 L or 4 ug/L.
Hi @Randy Holmes-Farley , can i pls ask something? According to wikipedia Zinc Chloride has molar mass 136.315 g/mol
I bought Zinc Chloride 98& anhydrous. According to the manufacturer the molar mass is same as for non-anhydrous - 136.28 g/mol
Does this sound right to you? Can both forms the anhydrous and non have same molar mass?
I need to make sure in order to calculate how much zinc is present.
Thank you very much!
 
Hi @Randy Holmes-Farley , can i pls ask something? According to wikipedia Zinc Chloride has molar mass 136.315 g/mol
I bought Zinc Chloride 98& anhydrous. According to the manufacturer the molar mass is same as for non-anhydrous - 136.28 g/mol
Does this sound right to you? Can both forms the anhydrous and non have same molar mass?
I need to make sure in order to calculate how much zinc is present.
Thank you very much!

The molar mass will never account for impurities. The molar mass of anhydrous zinc chloride is a fixed number, no matter what other stuff might be there by accident.

I would not use the 98% number for anything since you do not know whether it even has less zinc than pure anhydrous zinc chloride. Suppose the impurity is zinc sulfate. That will not noticeably reduce the zinc content, and even if it did, that change cannot be more than 2%. No reefer needs to dose zinc to better than +/- 2%.
 
The molar mass will never account for impurities. The molar mass of anhydrous zinc chloride is a fixed number, no matter what other stuff might be there by accident.

I would not use the 98% number for anything since you do not know whether it even has less zinc than pure anhydrous zinc chloride. Suppose the impurity is zinc sulfate. That will not noticeably reduce the zinc content, and even if it did, that change cannot be more than 2%. No reefer needs to dose zinc to better than +/- 2%.
understood, thanks for the explanation @Randy Holmes-Farley . The reason why i bought second batch of zinc was cause the first one( zinc chloride 97%) wasn't mixing great. There were things floating around. And I am dissolving 2g per 0.5L water which is far away from the solubility limit. I bought another one, this time i bought zinc chloride anhydrous 98% and surprisingly is mixing absolutely the same. It looks like its not fully dissolving and certain particles sink at the bottom of the bottle. Picture attached. Is this normal for the zinc chloride?
 

Attachments

  • IMG_20250901_130617990_HDR.jpg
    IMG_20250901_130617990_HDR.jpg
    145.5 KB · Views: 45
understood, thanks for the explanation @Randy Holmes-Farley . The reason why i bought second batch of zinc was cause the first one( zinc chloride 97%) wasn't mixing great. There were things floating around. And I am dissolving 2g per 0.5L water which is far away from the solubility limit. I bought another one, this time i bought zinc chloride anhydrous 98% and surprisingly is mixing absolutely the same. It looks like its not fully dissolving and certain particles sink at the bottom of the bottle. Picture attached. Is this normal for the zinc chloride?

What sort of water are you adding it into?
 
the picture is with distilled water, but tried RO as well. Same result. The floating particles settle at the bottom eventually but knowing how soluble zinc chloride is- i am confused

I’m not sure what the solids are. If there is and carbonate or bicarbonate impurity in the solid or in the source water, you might get zinc carbonate or zinc oxide. I’d probably just let it settle and ignore it.
 
I’m not sure what the solids are. If there is and carbonate or bicarbonate impurity in the solid or in the source water, you might get zinc carbonate or zinc oxide. I’d probably just let it settle and ignore it.
that's exactly what i am going to do. Thanks a lot for sharing your thoughts. Really appreciate it. Happy reefkeeping
 
Potassium iodide is 77% iodine by weight.

If you target 0.02 ppm to dose, then you will want to add 0.02 mg iodide per liter of aquarium water.

That means dosing 0.025 mg of the KI per liter or 2.5 mg/100 L of aquarium water.

You won't likely be able to weight that small of an amount, so make a stock dosing solution.

Dissolve 1 g KI in 1 L RO/DI. That solution contains 1 mg KI per mL.

So 2.5 mL of that solution added per 100 L of aquarium water will boost iodine by 0.02 ppm. :)

I think you can dose this at least a couple of times a week in a typical tank.

That all said, I'm also not of the opinion that iodine dosing is useful for most reef tanks. :)
Does any KI work. I found the following.
https://a.co/d/0fvep1CC
 

Attachments

  • Screenshot_20260312_080243_Amazon Shopping.jpg
    Screenshot_20260312_080243_Amazon Shopping.jpg
    69 KB · Views: 48
Can I use that for iron dosing
Iron(II) Sulfate Heptahydrate / Ferrous Sulfate / FeSO4.7H2O CP 500 Gram
 
Sure. The diy archive has dozens of recipes:


Here’s a ferrous gluconate recipe:

 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 21 25.9%
  • I’d trust someone who knows my tank to choose

    Votes: 7 8.6%
  • I’d rather get a gift card and pick it myself

    Votes: 30 37.0%
  • I’d prefer gear or supplies instead

    Votes: 2 2.5%
  • Please don’t surprise me with livestock

    Votes: 21 25.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new