DIY PVC overflow flow rates help.

  • Thread starter Thread starter Millz034
  • Start date Start date
  • Tagged users Tagged users None

Millz034

Community Member
View Badges
Joined
May 4, 2019
Messages
74
Reaction score
33
Location
Ottawa, Ontario, Canada
What state or country do you live in
Canada
Rating - 0%
0   0   0
I know from a lot of reading that the pvc overflow is a garbage design and everything but I am willing to try it as I set up my 125 gallon fowlr tank. I have read a lot of forums and everything and everyone is different. Was seeing from everyone here and experts or long time In the hobby and get another opinion of the flow rates. I will have a jebao 10000 or 8000 return pump with a 55 Gallon sump on my 125 gallon tank. The tank is in the midst of getting set up and I am trying a cheaper route for the overflow I do not want to risk blowing my tank apart since I have never drilled before. I will be using a 1 1/4 inch pvc over flow and if it does not work I will buy a Eshopps 1800 HOB overflow.
 
Flow rates for diy pvc over flows. I put a T end on mine. Water in side, air in top, with a little piece of foam in the top to quiet her. It’s really quiet, but I’m running dual 3/4’s

Been rock solid for reliability and performance.
8D3F7649-0968-4A38-93C8-A9C5BD421B3F.jpeg
 
Flow rates for diy pvc over flows. I put a T end on mine. Water in side, air in top, with a little piece of foam in the top to quiet her. It’s really quiet, but I’m running dual 3/4’s

Been rock solid for reliability and performance.
8D3F7649-0968-4A38-93C8-A9C5BD421B3F.jpeg
How long have you had it running I've read some ups and some downs. But I feel if done right there wilcbe no problem I am going to do tests before I fill the tank and establish it
 
2 months. All pumps shut down for 10 minutes once a day for feeding. Always starts back up.

I did add a aqua litter pump for back up to run for 1 minute every 30 minutes for peace of mind. I ended up shutting it off.

Went with 5/16 vent lines for the air. Dropped the lines into the cabinet. No noise.
 
2 months. All pumps shut down for 10 minutes once a day for feeding. Always starts back up.

I did add a aqua litter pump for back up to run for 1 minute every 30 minutes for peace of mind. I ended up shutting it off.

Went with 5/16 vent lines for the air. Dropped the lines into the cabinet. No noise.
Perfect I will be building two 1 1/4 pvc overflows this weekend and doing some tests I do have an aqua lifter i will use it until I am 100 percent with the build of the overflows
 
Blue lines are my prime lines, I hooked them together. This is where I blow water in to start the initial prime. Only have done it the first time I started it.

Third pic is my lifter. It’s off. Just running on gravity now.

4th pic is where that water dumps back into my sump.


586FEF95-E50C-46C3-ADE2-CBF75B31716C.jpeg 6EFD5BBF-CB42-49BC-882D-D11BE1498B7F.jpeg 81F58A4C-BD66-49D8-B040-F608DC86F9F5.jpeg D12F4250-C7B8-4F5A-BECB-16D67CEF1D8E.jpeg
 
Blue lines are my prime lines, I hooked them together. This is where I blow water in to start the initial prime. Only have done it the first time I started it.

Third pic is my lifter. It’s off. Just running on gravity now.

4th pic is where that water dumps back into my sump.


586FEF95-E50C-46C3-ADE2-CBF75B31716C.jpeg 6EFD5BBF-CB42-49BC-882D-D11BE1498B7F.jpeg 81F58A4C-BD66-49D8-B040-F608DC86F9F5.jpeg D12F4250-C7B8-4F5A-BECB-16D67CEF1D8E.jpeg
Nice set up looks clean... I am definitely going to give it a shot and mess around with it if it doesn't work I will just have to spend the cash for a HOB overflow box
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 3.6%
  • I decorate AROUND the tank or stand

    Votes: 4 14.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 19 67.9%
  • We don’t decorate for the holidays

    Votes: 4 14.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new