Does neoMag etc have MG sulfate and MG chloride
- Thread starter NEFFx
- Start date
- Tagged users None
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
- Joined
- Sep 5, 2014
- Messages
- 68,009
- Reaction score
- 64,431
It really can only be used to maintain magnesium, not raise it significantly for reasons I describe here:
reefs.com
from it:
It has been suggested that adding dolomite to CaCO3/CO2 reactors can help with magnesium problems. Dolomite is a material that contains both magnesium and calcium carbonate. If dolomite is being added to the reactor to maintain existing appropriate magnesium levels against the continual depletion via calcification (for example, if the calcium carbonate being used is too low in magnesium to maintain adequate magnesium) then this is a fine approach.
However, this method is unsuitable if the goal is to raise magnesium levels. The problem is that for every magnesium ion released from the dolomite, 2 units of alkalinity are also released:
MgCO3 → Mg2+ + CO32-
Consequently, if one wants to raise magnesium by 100 ppm, the alkalinity will necessarily rise by 8.2 meq/L (23 dKH). The only way around this problem is to add a mineral acid (not vinegar) to the aquarium to reduce the alkalinity, and that may be more problematic than just adding magnesium in the first place.
Aquarium Chemistry: Magnesium In Reef Aquaria
This article details the nature of magnesium in seawater, how it is added, measured, and removed from marine aquaria, and how it impacts the maintenance of calcium and alkalinity.
reefs.com
from it:
It has been suggested that adding dolomite to CaCO3/CO2 reactors can help with magnesium problems. Dolomite is a material that contains both magnesium and calcium carbonate. If dolomite is being added to the reactor to maintain existing appropriate magnesium levels against the continual depletion via calcification (for example, if the calcium carbonate being used is too low in magnesium to maintain adequate magnesium) then this is a fine approach.
However, this method is unsuitable if the goal is to raise magnesium levels. The problem is that for every magnesium ion released from the dolomite, 2 units of alkalinity are also released:
MgCO3 → Mg2+ + CO32-
Consequently, if one wants to raise magnesium by 100 ppm, the alkalinity will necessarily rise by 8.2 meq/L (23 dKH). The only way around this problem is to add a mineral acid (not vinegar) to the aquarium to reduce the alkalinity, and that may be more problematic than just adding magnesium in the first place.
Similar threads
-
- AMS: Article
