Does this seam look ok?

The.Seabeast

Active Member
View Badges
Joined
Sep 13, 2022
Messages
226
Reaction score
37
Location
Iowa
Rating - 100%
2   0   0
Hey guys,

I recently bought a used Innovative Marine 50 AIO. When I brought it home I noticed there is some dry salt creep under a portion of one of the seams. See picture below. The rest of the seams are flawless, but would you be worried about portion of the seam in the picture? Thanks!

0.jpg
 

JumboShrimp

7500 Club Member
View Badges
Joined
Aug 12, 2018
Messages
9,125
Reaction score
12,520
Rating - 0%
0   0   0
Does it look to you as if that's an area when an algae scraper (blade) was used aggressively?
 
OP
OP
The.Seabeast

The.Seabeast

Active Member
View Badges
Joined
Sep 13, 2022
Messages
226
Reaction score
37
Location
Iowa
Rating - 100%
2   0   0
I would say that is what happened since the edge of the seam is rough only in this location.
 

JumboShrimp

7500 Club Member
View Badges
Joined
Aug 12, 2018
Messages
9,125
Reaction score
12,520
Rating - 0%
0   0   0
That's kind of what I thought. I'm super careful to stop my blade short of the silicone.

You might have adequate silicone left to keep a good hold-- you are probably in the best vantage point to know. Generally the smaller the tank (water weight being held), the better. What are your tank dimensions / gallons? That is a side panel in the photo, right?
 

UncommonSense

2500 Club Member
View Badges
Joined
May 4, 2025
Messages
4,264
Reaction score
4,991
Location
Monterey Bay area, California
Rating - 0%
0   0   0
When I brought it home I noticed there is some dry salt creep under a portion of one of the seams.
This definitely does look like over-enthusiastic algae scraping, followed by coralline algae filling in the crevice!

Thankfully, this damage is only to the cosmetic interior fillet of silicone, and not the structural glass:glass silicone seam! (you can see these structural seams when viewing through the long front glass pane)

The rest of the seams are flawless

This said, this tank should indeed be fine to fill and use!
 
OP
OP
The.Seabeast

The.Seabeast

Active Member
View Badges
Joined
Sep 13, 2022
Messages
226
Reaction score
37
Location
Iowa
Rating - 100%
2   0   0
That's kind of what I thought. I'm super careful to stop my blade short of the silicone.

You might have adequate silicone left to keep a good hold-- you are probably in the best vantage point to know. Generally the smaller the tank (water weight being held), the better. What are your tank dimensions / gallons? That is a side panel in the photo, right?
Innovative Marine 50 gallon AIO roughly 16” tall, 30” wide, 23.5” deep. That spot is about 2/3 up the left side panel
 

JumboShrimp

7500 Club Member
View Badges
Joined
Aug 12, 2018
Messages
9,125
Reaction score
12,520
Rating - 0%
0   0   0
Oh, sorry-- you mentioned that in your first post. You're probably good. They are nice tanks. I'd just keep an eye on it periodically since the tank is 'new to you,' and definitely do a more careful job with your scraper than the previous owner. Enjoy your tank! Send a photo when you are wet & fishy!
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 37 27.8%
  • 100% dry rock + 100% live sand

    Votes: 45 33.8%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 29 21.8%
  • 75% live rock, 25% live sand

    Votes: 12 9.0%
  • 25% live rock, 75% live sand

    Votes: 10 7.5%
Back
Top