Dosing pump - 1 head, 2 hoses - dosing 2 part?

  • Thread starter Thread starter OG-Goby
  • Start date Start date
  • Tagged users Tagged users None

OG-Goby

Community Member
View Badges
Joined
Feb 2, 2024
Messages
26
Reaction score
9
Location
somewhere in between TSA, WWC and LRO
What state or country do you live in
Florida
Rating - 0%
0   0   0
Hi,

I have this old dosing pump. Looks like some rebadged hospital surplus…

It has one head, but is setup with 2 tubes. So it can dose 2 separate things at once.

I realize 2 part should not be dosed at the same time, however…

If I dose the alk in my sump in the first chamber while dosing the ca in the main tank, would this suffice to keep them from precipitating due to mixing?

I just hate to toss old but functional equipment.

If it matters it’s an IM50EXT with their RFS22 sump. Around 50 gallons total volume.
 
I still think you will get precipitation and what happens if you need slightly different dosing amounts of alk or cal?
 
Hi,

I have this old dosing pump. Looks like some rebadged hospital surplus…

It has one head, but is setup with 2 tubes. So it can dose 2 separate things at once.

I realize 2 part should not be dosed at the same time, however…

If I dose the alk in my sump in the first chamber while dosing the ca in the main tank, would this suffice to keep them from precipitating due to mixing?

I just hate to toss old but functional equipment.

If it matters it’s an IM50EXT with their RFS22 sump. Around 50 gallons total volume.
I don't think it would be an issue.
 
precipitation will accur most likely.
How, if they are mixed with saltwater before they combine? I did some tests with sodium bicarb and calcium chloride in saltwater and silly amounts can be added without visible precipitation.
 
I still think you will get precipitation and what happens if you need slightly different dosing amounts of alk or cal?
I’m not afraid of adding a little manually of one or the other every once in a while based on regular testing.
 
How, if they are mixed with saltwater before they combine? I did some tests with sodium bicarb and calcium chloride in saltwater and silly amounts can be added without visible precipitation.
I guess when the substrate turns to concrete then you know.
 
I guess when the substrate turns to concrete then you know.
Well, that may happen with any high pH Alk supplement, even without the added calcium to be honest. As you know, there's quite a lot of calcium there already. I'm not sure that the concrete sand beds often reported in new tanks and forming rocks from adding high pH additives are even the same thing to be honest.

https://www.reef2reef.com/threads/exceeding-the-limewater-evaporation-limit.984542/post-11619824
 
That hospital surplus pump might be very high quality. I’d keep using it. You might want to start another thread about it and how its maintained.

I also think you’d be OK dosing both parts at once in separate chambers of the sump as you described. Obviously this is debatable but I’d try it.
 

WHICH KIND OF INVERT HAS CAUSED THE MOST MISCHIEF IN YOUR TANK?

  • Sea urchins

    Votes: 16 22.9%
  • Hermit crabs

    Votes: 12 17.1%
  • Other crabs

    Votes: 5 7.1%
  • Shrimp

    Votes: 6 8.6%
  • Snails or conchs

    Votes: 3 4.3%
  • Sea stars

    Votes: 0 0.0%
  • Anemones

    Votes: 12 17.1%
  • None! My inverts are model citizens. :-)

    Votes: 12 17.1%
  • Something else (tell us in the comments)

    Votes: 4 5.7%
Back
Top
Home
Post thread…
Market
What's new