Dual Maxspect xf350 programming help

  • Thread starter Thread starter Reefpuck
  • Start date Start date
  • Tagged users Tagged users None

Reefpuck

Well-Known Member
View Badges
Joined
Jul 15, 2018
Messages
649
Reaction score
891
Location
Georgetown, TX
What state or country do you live in
Texas
Rating - 0%
0   0   0
I have two xf350s on an advanced controller. Alternating flow every 10 seconds.

But one pump is always at 10% while the other ramps up. Is there a way it can just shut off for the 10 seconds while the other pump is on? I want the flow to cycle all the way around the tank but the lower speed pump at 10% is fighting the flow/circulation from the other ramped-up pump.

20191215_204108.jpg
 
You can’t do 0% in any mode except alternating gyre mode. I have xf250 pair.
 
You can’t do 0% in any mode except alternating gyre mode. I have xf250 pair.
Hi Thanks for your support, actually you can do 0% in constant speed mode also.
For Pulsing mode, because only the parameter of maximum flow is adjustable, so there's no point in allowing the user to choose 0% as the maximum flow. As shown in below picture, also for pulsing mode and gradual pulsing mode, the minimum flow is fixed at 10%, while the maximum flow is adjustable, so there's no point in providing the 0% to set in these modes:
pulsing mode.png
 
Would be a nice option to have...other pumps have the option to pulse with 0% on the "minimum" flow setting. But appreciate the feedback...I'll play around with it more.
 
Hi Thanks for your support, actually you can do 0% in constant speed mode also.
For Pulsing mode, because only the parameter of maximum flow is adjustable, so there's no point in allowing the user to choose 0% as the maximum flow. As shown in below picture, also for pulsing mode and gradual pulsing mode, the minimum flow is fixed at 10%, while the maximum flow is adjustable, so there's no point in providing the 0% to set in these modes:
pulsing mode.png

I don't have the wifi controller...but to follow up my original question...with that controller can I set intervals to 30 seconds or a minute? Right now the max is only 10secs with the advanced controller. I want each pump to have time to circulate water around the tank.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new