Evergrow / Semigrow replacement driver needed

[McPikie]

So I think the driver is knackered on my IT2080 for the 3 UV bulbs. They started flickering the other night.

I've had to set it to go from 10 to zero on the blue channel now as 1-9 shows up the flicker and is causing fish stress.

Does anyone have a spare one, or know the part number/voltage etc, so I don't have to take my light unit down and pull it apart before ordering?

 

[oreo54]

Historically these boxes have used various drivers..Would be hard to "guess" at the exact one inside..
One person listed this as a part # for your model:
2G-3856W-ZN

Trying that led to this.. different but prob very similar..
Getting one retail though???
http://www.welitpower.com/en/index.php?case=archive&act=show&aid=223
These specs matter.. ;)

Output voltage range：70-100V
Output current：600mA

As well as dimming..

good luck.

Oh, most likely specs on yours:
50-100V
500-550mA..

 

[McPikie]

Thanks for that dude, but I think they are the drivers for the main lights, not the small ones

 

[oreo54]

Those are for the main lights. One for white, one for blue. Don't confuse "listed" Watts with real Watts per channel.
https://www.ebay.com/itm/Evergrow-I...=true&nordt=true&rt=nc&_trksid=p2047675.l2557

 

[McPikie]

This is what I need

 

[oreo54]

Oh for moonlights...Sorry let me check this a bit.

http://www.recifal-france.fr/reparation-rampe-it2080-t31473.html

In my defense I'm used to people needing the main drivers...Or a senior moment

 

[McPikie]

That's for the fans

Its not. The fans are on and I've unplugged that driver. The fans run as soon as the settings go over 10

 

[oreo54]

Corrected the error. Sorry , just not firing on all cylinders on this.
I assume the channel is dimmable soo substitutes won't work..
https://www.aliexpress.com/item/2-3...0-260V-300mA-Used-For-Various/2044535643.html

From the labeling its almost like a custom part and I can't find any matching equivalents by case style..

 

[McPikie]

Guess that could work. Will order and try it. Cheers

 

[Andrei P]

Hello ,
i have the same issue . Have you solved yours and how ?

 

[McPikie]

I've ordered a new driver. Will have to see if that solves the problem when it finally arrives from China

 

[Peña]

Hi mates! I have the same problem. Did you get somewhere the proper driver? That would sort It out? Thanks

 

[Peña]

Update. I get the new driver. Now Moon leds work but this driver only has 2 power conections and evergrows original driver has a third one to conect to the led screen, so you cannot switch off never while is powered.
Sorry for my english.
Now trying yo get the original to fix It properly

 

[Myths384]

Hi did you ever get it fixed

 

[Myths384]

Anybody any idea where I can get one of these for my evergrow lighting unit

 

[Peja160]

This is what I need

Hi did you find replacment as I have the same problem

 

[d5332]

Hi. Anyone ever figure out how to get these driver replacements?

 

[oreo54]

(2021) Hi,

That's called the moon LED driver. We have a small number left under the parts section on our website. We discontinued these about 4 years ago so parts are very limited.

From reefbreeders but " build" is the same.

 

[Digger76]

I changed the all the capacitators on all drivers and now it works like new...