Fish room layout

SteveG_inDC

Active Member
View Badges
Joined
Feb 17, 2020
Messages
383
Reaction score
517
Location
Washington, DC
What state or country do you live in
Maryland
Rating - 0%
0   0   0
So I am setting up my fishroom, approx 10x10, with 6'x2.5' taken up by the tank, 2'x6' taken up by laundry sink and water changing station. What are the things I need to plan for?

Here is my list. What am I missing?
* Tank/sump -- most equipment will be in the sump under the stand. Mount controllers, monitors, and switches, with hooks for nets, scrapers, feeding tools on side of stand or adjacent wall
* Water changing: 2x55g drums + laundry sink, two shelves above the drums to hold salt, misc. equipment like tools, extra T5 bulbs, extra heaters and pumps, as well as topoff and waste containers for a DIY water changing station and an ATO (goes on floor if too heavy) -- shelves are rated for 1,000 lbs each.
* Floor drain near the sump
* Workbench where i'll do parameter testing, fragging, and any plankton culturing (phyto, brine shrimp, etc.) w/comfortable chair
* Quarantine tank on a stand -- I have a 20- and 30- gallon tank, so one of those -- set up both? Store medications, nets, airline tubing for acclimatizing drips underneath
* Dehumidifier (the whole house electrical panel is in the room!)
* Dorm fridge (freezer for fish food, fridge for beer)
* Replace overhead light fixture (warm lighting) with long fluorescent shop light
 
So I am setting up my fishroom, approx 10x10, with 6'x2.5' taken up by the tank, 2'x6' taken up by laundry sink and water changing station. What are the things I need to plan for?

Here is my list. What am I missing?
* Tank/sump -- most equipment will be in the sump under the stand. Mount controllers, monitors, and switches, with hooks for nets, scrapers, feeding tools on side of stand or adjacent wall
* Water changing: 2x55g drums + laundry sink, two shelves above the drums to hold salt, misc. equipment like tools, extra T5 bulbs, extra heaters and pumps, as well as topoff and waste containers for a DIY water changing station and an ATO (goes on floor if too heavy) -- shelves are rated for 1,000 lbs each.
* Floor drain near the sump
* Workbench where i'll do parameter testing, fragging, and any plankton culturing (phyto, brine shrimp, etc.) w/comfortable chair
* Quarantine tank on a stand -- I have a 20- and 30- gallon tank, so one of those -- set up both? Store medications, nets, airline tubing for acclimatizing drips underneath
* Dehumidifier (the whole house electrical panel is in the room!)
* Dorm fridge (freezer for fish food, fridge for beer)
* Replace overhead light fixture (warm lighting) with long fluorescent shop light
Sound like a plan to me..
 
I would permanently set up only one QT/hospital, and keep the second in storage. If disaster strikes, you can always do the second as a temporary thing.
 
I would permanently set up only one QT/hospital, and keep the second in storage. If disaster strikes, you can always do the second as a temporary thing.

I will confess that in my last tank I never quarantined corals. How do you deal with QTs for both fish and corals? If you treat with copper you can't keep corals or other inverts in there, right? (In 5 years of quarantining fish I never once had a sick patient to treat).
 

WHAT KIND OF SUBSTRATE ARE YOU RUNNING ON YOUR TANK?

  • Bare bottom

    Votes: 6 23.1%
  • A shallow bed of fine sand

    Votes: 6 23.1%
  • A shallow bed of coarser sand

    Votes: 5 19.2%
  • A deep sand bed

    Votes: 3 11.5%
  • Mixed substrate or varying sand depth

    Votes: 6 23.1%
  • Some other substrate (posted in the comments)

    Votes: 0 0.0%
  • I don’t have a reef tank yet

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new