FishFace NJ build

[redfishbluefish]

Well last weekend I drove 40 minutes north of me to the nearest LFS. Asked if they could get me a 90g or 120g that has the length in non-tempered glass. He said he would check with the vendors. He came back to me with the answer of no guaranty on the glass if he orders. Yesterday and today I drove to 3 Petco to check on their supply of 75g (the largest size they carry). They were all tempered glass. I was hoping to drill the tank and use my Modular Marine overflow. This would save me money. The only route now is to spend $2100+ on just the tank.

Check out Glass Cages. It's been a couple years, but I paid $745 for my five foot 90.

Base Price (60 x 18 x 21)...........$528
Low Iron Glass (front only)......$..92
Shipping....................................$125
TOTAL.......................................$745

 

[Pntbll687]

Well last weekend I drove 40 minutes north of me to the nearest LFS. Asked if they could get me a 90g or 120g that has the length in non-tempered glass. He said he would check with the vendors. He came back to me with the answer of no guaranty on the glass if he orders. Yesterday and today I drove to 3 Petco to check on their supply of 75g (the largest size they carry). They were all tempered glass. I was hoping to drill the tank and use my Modular Marine overflow. This would save me money. The only route now is to spend $2100+ on just the tank.

I work in distribution, and sell aqueon and marineland tanks. Aqueon uses whatever glass is available, so some sides may be tempered, and some not, every tank might be different. Marineland USUALLY puts a sticker on the bottom that says "bottom glass tempered, do not drill" or "all sides tempered" if there is one vertical panel that is tempered.

Your best bet is to get some polarized glasses and use your phone to check to see if they are tempered while in the store.

Here's a couple vids that show how to test for tempered glass




If you need a 75, a 60 breeder would be a good option, its only a couple inches shorter than a 75, and all I have dealt with were drillable.

 

[fishface NJ]

Seapora you can order drilled but they only have internal overflows. On the ones that aren't drilled the panels are labeled as far as tempered or non. I know a lot of stores are running sales on these right now. Good tanks and inexpensive. A step above marineland and aqueon shelf tanks.

Seapora Products

seaporaproducts.com

The other option would be SCA. But those are drilled for a Synergy Shadow overflow.

https://www.scaquariums.com/

Sorry I can't be more help with you specific situation. Fwiw I do like my Synergy.

@fishguy242 thank you for pointing @Stang67 this way! Much appreciated!

@Stang67 thank you for the info on Seapora and SCA. On the Synergy overflows: I heard in the past they were noisy. Is this not true? This would be a great tank since it's in stock....150g drilled for Synergy overflow 60x24 for only $1495

 

[Stang67]

@fishguy242 thank you for pointing @Stang67 this way! Much appreciated!

@Stang67 thank you for the info on Seapora and SCA. On the Synergy overflows: I heard in the past they were noisy. Is this not true? This would be a great tank since it's in stock....150g drilled for Synergy overflow 60x24 for only $1495

I guess it depends on what you feel is "noisy". I like the sound the water makes as it flows into the system I have, but I can see how that can be irritating to some. Also I have a good valve on the primary and a dc return so I could probably tune it in some but I don't. I like the sound because if it ever "sounds off" it usually means I need to do something ( clean the weirs etc).

 

[fishface NJ]

Check out Glass Cages. It's been a couple years, but I paid $745 for my five foot 90.

Base Price (60 x 18 x 21)...........$528
Low Iron Glass (front only)......$..92
Shipping....................................$125
TOTAL.......................................$745

Prices since Covid are a little higher now. Glass Cages tanks are really nice!

Base price 60x18x21....$885
low Iron front only.... $302
Shipping.....$250

If I go down the road to have Glass Cage build me a tank, I would have them do a notched exterior Bean Animal overflow.

 

[fishface NJ]

I work in distribution, and sell aqueon and marineland tanks. Aqueon uses whatever glass is available, so some sides may be tempered, and some not, every tank might be different. Marineland USUALLY puts a sticker on the bottom that says "bottom glass tempered, do not drill" or "all sides tempered" if there is one vertical panel that is tempered.

Your best bet is to get some polarized glasses and use your phone to check to see if they are tempered while in the store.

Here's a couple vids that show how to test for tempered glass




If you need a 75, a 60 breeder would be a good option, its only a couple inches shorter than a 75, and all I have dealt with were drillable.

Thanks! This is exactly what I did when I went to Petco out of desperation for a new tank.

 

[redfishbluefish]

Prices since Covid are a little higher now. Glass Cages tanks are really nice!

Base price 60x18x21....$885
low Iron front only.... $302
Shipping.....$250

If I go down the road to have Glass Cage build me a tank, I would have them do a notched exterior Bean Animal overflow.

Wow! FWIW, I wouldn't do low iron glass if I had to do it all over.

Without going back and looking, not sure if it was mentioned here, but have you checked out Hidden Reef in PA? Haven't been there in a while, but they pretty much sold tanks at cost. Might be worth the drive, especially if you also include a major salt buy.

 

[fishface NJ]

Wow! FWIW, I wouldn't do low iron glass if I had to do it all over.

Without going back and looking, not sure if it was mentioned here, but have you checked out Hidden Reef in PA? Haven't been there in a while, but they pretty much sold tanks at cost. Might be worth the drive, especially if you also include a major salt buy.

Thanks! I'll give them a call. That is a long drive for me. I work Tues to Sunday....Monday is my only day off

 

[fishface NJ]

@Stang67 I am pretty positive I will go with SCA. I emailed Modular Marine to see if he can make an overflow to fit the SCA instead of using the Synergy overflow. Just waiting on his reply. Thank you for pointing me in that direction.

 

[shookONES]

Still having issues finding a non-tempered tank? I’ve bought and drilled 2 in the last few months. No issues here up north NJ

 

[fishface NJ]

Just ordered from NY Aquatics for the new aquarium. These will go into QT for a few weeks

 

[fishface NJ]

Just ordered from NY Aquatics for the new aquarium. These will go into QT for a few weeks

NY Aquatics canceled my order that was scheduled to ship out today for tomorrow delivery. Mike said the Christmas Wrasse got an injury on its side and the Tamarin died :disappointed-face:

 

[tbrown]

NY Aquatics canceled my order that was scheduled to ship out today for tomorrow delivery. Mike said the Christmas Wrasse got an injury on its side and the Tamarin died :disappointed-face:

Sorry to hear that! They're both beautiful wrasses.

 

[fishface NJ]

Happy Saturday!

I was adjusting my gate value to my bean animal main drain. I must have loosened the pipe. Now here is a drip from the nut on the overflow box

 

[fishface NJ]

Got very close to emptying the tank so I could move it away from the wall. Two hours later I had successfully stopped the leak. I was able to get my plumbing wrench into the area to tighten the nut. Had to hold the wrench vertical to the nut. There was no way to hold the wrench horizontal. Had a keylime martini after that. lol

 

[Buckster]

Wow! I can't believe that your tank build goes from august 2019 till now. Covid was unfortunately a pain for us all. Maybe one day I will submit my tank build. I guess-better late than never! Wish you good luck with all future dealings with your tank. "Key lime martini" I prefer miller lite

 

[Kweezy12]

nice tank!
GL

 

[fishface NJ]

Monday is my one day off from work. Can wait to retire lol. Well anyway….I’m sitting at my computer and I turned around to look at my tank and I was happily surprised. I haven’t seen my Radiant Wrasse since an added him to the tank in May. Sorry about the pods on the glass. Didn’t want to clear them off and scare the wrasse into hiding

 

[fishface NJ]

Howdy all! Hope everyone had a nice weekend. Worked my butt off with 13 hour days for 9 days straight. Can't wait to retire.

My 150g tank shipped out Nov 21 from CA. I had asked them if it could arrive after Dec 20...which is my last day of work...they agreed. Didn't think it would take that long for a tank to travel from CA to NJ.

 

[fishface NJ]

Just checked the location of my SCA tank. Left CA on Nov 21and departed today from IL. I'm afraid this tank is going to arrive before Dec 20 :oops: