Foam pad under tank???

Midnitecloud

Community Member
View Badges
Joined
Jun 16, 2019
Messages
67
Reaction score
29
What state or country do you live in
Florida
Rating - 0%
0   0   0
I am upgrading to a 60 gallon Marineland cube, and I'm fairly new to the hobby. The glass on the sides goes all the way to the bottom, and the bottom glass has a layer of silicone in between it and the sides. From what I've read this is a floating bottom and you shouldn't use foam under it. I am planning to build an over sized cabinet for the tank so I can have a decent sump. The plan is to have the top of the cabinet be a sheet of plywood and have the tank sit on it. Is there anything I should put under the tank or will it be fine sitting on the plywood. The below picture isn't mine but I plan to do a similar stand.

Stand 2.jpeg
 
I am upgrading to a 60 gallon Marineland cube, and I'm fairly new to the hobby. The glass on the sides goes all the way to the bottom, and the bottom glass has a layer of silicone in between it and the sides. From what I've read this is a floating bottom and you shouldn't use foam under it. I am planning to build an over sized cabinet for the tank so I can have a decent sump. The plan is to have the top of the cabinet be a sheet of plywood and have the tank sit on it. Is there anything I should put under the tank or will it be fine sitting on the plywood. The below picture isn't mine but I plan to do a similar stand.

Stand 2.jpeg
No expert here but if the tank doesn't have a rim it should be sitting on a foam mat of some kind think a yoga mat would work fin
 
I was thinking the same thing but I read that with a floating bottom the foam pad can push up on the bottom and weaken the seals causing it to leak. So it seems you either risk the plywood causing a pressure point or the foam causing a leak. I was hopeing maybe a thin foam pad would be okay.
 
I email Marineland and asked them "I have a 60 gallon Frameless Cube Aquarium. The stand I plan to put it on has a plywood top. Should i put a foam pad under the tank or should I put the tank directly on the plywood? " and the response i got was;

Thank you for reaching out to us and we would not recommend that you put anything between the tank and the stand.



Thank you,



Christina Gusler
Consumer Relations
Spectrum Brands – Global Pet Care Division
 
Sounds like you have an answer. Good luck. Can’t wait to read your build thread.
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 14 60.9%
  • Automated dosing

    Votes: 0 0.0%
  • Mechanical filtration / roller filter

    Votes: 2 8.7%
  • Automated water testing

    Votes: 0 0.0%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 4 17.4%
  • Controller and remote monitoring

    Votes: 2 8.7%
  • Leak detection and emergency shutoff

    Votes: 1 4.3%
  • Automatic water changes

    Votes: 0 0.0%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new