- Joined
- Mar 9, 2016
- Messages
- 333
- Reaction score
- 494
Sunday I dosed my newly setup 170 total volume tank with Fritz TurboStart 900 and two hours later added NitroCycle, which is a new inorganic nitrogen source by @AlgaeBarn.
There is little to no information about NitroCycle, so I figured I’d post my results here so anyone looking to use these products together would have some data.
My tank has a 130 gallon display and 40 gallon sump. In it are 80 lbs of dry base rock, 60 lbs of rinsed and cloudless CaribSea Hawaiian Black “Live” Sand, 1 Marine Pure plate, and 4 Eshopps BioLux blocks. I’m using regular Instant Ocean for the cycle mixed to 1.026 and the tank is 77-78 degrees. No filter socks or skimmer being run during the cycle.
I’ll update this thread daily throughout my cycle. Here are my test results from yesterday and today:
There is little to no information about NitroCycle, so I figured I’d post my results here so anyone looking to use these products together would have some data.
My tank has a 130 gallon display and 40 gallon sump. In it are 80 lbs of dry base rock, 60 lbs of rinsed and cloudless CaribSea Hawaiian Black “Live” Sand, 1 Marine Pure plate, and 4 Eshopps BioLux blocks. I’m using regular Instant Ocean for the cycle mixed to 1.026 and the tank is 77-78 degrees. No filter socks or skimmer being run during the cycle.
I’ll update this thread daily throughout my cycle. Here are my test results from yesterday and today: