FS Jebao to Apex Adapter

[lemonyx]

Made up a couple (2) of these cables for some local members and they changed their minds. Two adapters that will reduce the +10 from the Apex to +5v for Jebao and the cat 5 that hooks up to the Apex unit, aprox 6' long, $50 shipped, take paypal and username on eBay is the same for reference

 

[lemonyx]

Found this program and modified it to suit my needs programming (not mine)



Variable Speed Pump 1 and 2

WP40_Lt

Set Wave1
If Time 08:00 to 10:59 Then DuskDawn
If Time 11:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Lt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF



WP40_Rt

Set Wave1
If Time 08:00 to 11:59 Then DuskDawn
If Time 12:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Rt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF

Pump Profiles:

Wave1 (main daylight wave pattern)

Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100


Wave2 (Similar pattern to the above but Sync is disabled which creates abit more chaos)

Synchronize Disabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100


Lt_Flush

Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90


Rt_Flush

Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 30
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90


DuskDawn (This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)

Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30


Night (Sets a constant 30% flow during light off hours)

Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30



Virtual Outlets

3 timers. The timers are used to create short random periods of different flow during daylight hours.


Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off)

OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF


Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on)

OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF


Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on)

OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF