Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Don't see par readings?!?What % are people running their schedule at
I'm running ab+ but have had to drop my schedule down to 35%, to the eye it doesn't look.too bright, but I'm getting the following par readings.
Probally not an ideal colour, but it's in orange in the photoDon't see par readings?!?
Wow, I just set up a hybrid with G3s & 2 B+,1 C+ and 1 Actinic. With onlw front B+, C+ I see a 20-30 par increase and have yet to turn back on. What did you check par with?Probally not an ideal colour, but it's in orange in the photo
Only a seneye, but I bought it based on the BRS review they did when comparing it to other par meters.Wow, I just set up a hybrid with G3s & 2 B+,1 C+ and 1 Actinic. With onlw front B+, C+ I see a 20-30 par increase and have yet to turn back on. What did you check par with?
Only a seneye, but I bought it based on the BRS review they did when comparing it to other par meters.
I guess the low % on the G5 blues is because ab + uses 100% on all channels . I assume the G5 pros would need a higher % as it doesn't fully utilize all the channels
Ok , that's different. You took the readings at 100%? By your post I was thinking you took them at 35% . I would bump that up over time. 10% per week.The numbers are consistent tho, all channels at 100
Tenuis likes high par. Where is your UV at? Take it slowly with UV. I don't have Radions. I have Mitras lx7's. Your Monti on top should have been affected before the tenuis. Monti can take the heat. Just slowly.Each color Channel was fully utilised, but the overall schedule was running at 35%.
I did have it running at 45 but my tenious acro started bleaching and it was reporting high 400 in par
@adams901 - could you tell me how high the light is above the water surface with the Multi-Light RMS? Thank you.
Are you running blues or pro, and how high above the water line?I have an Apagre meter and running my light at 50% overall intensity. Half way up my tank in the middle I’m getting about 300 PAR.
Are you running blues or pro, and how high above the water line?
If pro it would make sense they need higher overall intensity as not all of the LEDs are being utilised to their full potential. On the blues all colours have their sliders at 100, pros and blues running ab+ 50% should see the blues putting out more par
What size is your tank?
5ft , it's the 525xlWhat size is your tank?