GFO or Phosguard While Dosing Silicates.

  • Thread starter Thread starter Davisc1293
  • Start date Start date
  • Tagged users Tagged users None

Davisc1293

Active Member
View Badges
Joined
Sep 16, 2021
Messages
402
Reaction score
94
Location
Rhode Island
What state or country do you live in
Rhode Island
Rating - 0%
0   0   0
My phosphates have gotten rather high after ignoring my test results for awhile. Ive been dosing silicates and need to bring my PO4 down at the same time. Is one product better at removing PO4 while still having alot of silicates in the water. I understand both GFO and Phosguard remove both silicates and PO4 but i was just wondering if one would be better than the other in this situation.
 
This is a balance act - both GFO (iron based) and products based on aluminium remove silicates. IME - GFO is more effective to remove silicates compared with Al based (as Phosguard).

However - Al based products will also give you some Al in the water - normally of low concern but it can be important to have a close eye on that.

What Si levels do you have now and which levels do you want to have?

Sincerely Lasse
 
FWIW, I used both GFO and silicate dosing at the same time, and the silicate was clearly sufficient to boost diatoms each time I dosed it because the film that grew on the glass transiently changed from green to golden brown.
 
This is a balance act - both GFO (iron based) and products based on aluminium remove silicates. IME - GFO is more effective to remove silicates compared with Al based (as Phosguard).

However - Al based products will also give you some Al in the water - normally of low concern but it can be important to have a close eye on that.

What Si levels do you have now and which levels do you want to have?

Sincerely Lasse
I Dose 2ppm daily but the tank has never tested greater then 1ppm for silicates. While trying to remove phosphates i just wasn't sure if one would be better then the other, but it sounds like i should be using both or at least alternate. Thanks for the tips guys!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new