GHL doser 2.0

[Volcom6981]

Hello I just got back into the hobby and got my doser 2.0 out. I did a firmware update, which worked, but says I'm on version 1.15? The firmware date is 1/11/16? So maybe all of this is correct I just want to make sure.

If this is not correct is there somewhere I can go to get the correct update or how to get the correct update. I also noticed that the GHL app that I did have is not connecting to the device. I have been away for a little while so I'm guessing things changed? Any help would be much appreciated thanks you.

 

[Support@GHLUSA]

Hello; Welcome Back!

The firmware is bundled with the installed version of GCC - you must be running an older version.
Go ahead and install the latest version of GCC (https://www.aquariumcomputer.com/downloads/ghl-control-center-v1-1-1-7/) - this will allow you to update the Doser to v1.29.

Also ditch the old mobile app, and install GHL Connect.
https://www.aquariumcomputer.com/software/ghl-connect-app/

Found in both Android Play Store and Apple App Store.

 

[Volcom6981]

Awesome thanks for the quick response, I was able to download everything.

I take it to calibrate it and do the dosing is the same as before? Just follow the instructions for the doser 2.0? Thanks again

 

[Support@GHLUSA]

Correct, same calibration.

 

[Volcom6981]

Ok everything works with the GHL control center, but does not work with the MyGHL.

I only have the stand alone doser 2 hooked up that's it. I'm running firmware 1.28 which from what I can tell is the latest version.

Issue I'm having is ive been out of the hobby for awhile, and the GHL control center gave me a new my GHL ID. I go and put my new ID in and it tells me the device could not be added. It's says please check if I have the correct ID, which I do, and it says something about the profilex 4/Mitas wifi firmware 6718 or above. I don't have either of those so not sure that matters? However I did update what I could? Any ideas? Thanks.