GHL help
- Thread starter saltyfins
- Start date
- Tagged users None
1
169468
Guest
You’re going to need to describe your issue.
What do you mean by ‘getting the system plugged in’?
What do you mean by ‘getting the system plugged in’?
OP
OP
saltyfins
Valuable Member
Ok. big breath...
I bought a 300 gallon system from someone, and he was running GHL the Profilux system part...I have no idea where any cables go, because He basically unplugged everything, and threw it in a box. There's no english manual, so that's not helpful. I cannot get the "brain" to start...it lights up but that's it...the touch pad does nothing...so I dont know if I even have THAT much done right. I am wondering if anyone runs this, that could possibly show pictures, or help walk me through it?
1
169468
Guest
All of the English manuals are available for download at www.aquariumcomputer.com
There is nothing to the ‘brain’; you just plug the power supply in. If it came with dosers etc, then make sure you have the correct power supply. The Profilux uses 12v; everything else is 24v.
Which model Profilux is it? Do you have any other units or just the Profilux and PowerBar?
There is nothing to the ‘brain’; you just plug the power supply in. If it came with dosers etc, then make sure you have the correct power supply. The Profilux uses 12v; everything else is 24v.
Which model Profilux is it? Do you have any other units or just the Profilux and PowerBar?
OP
OP
saltyfins
Valuable Member
doser, heaters, pad, lights....I am there, at that website, it's just very overwhelming, and it assumes you have it all hooked up. there's also a small box, that looks like it's for PAM plugs, but there's no way of knowing what it is.
1
169468
Guest
This looks like the Profilux 3 manual.
www.aquariumcomputer.com
I have the 4 which is a bit different. I think trying to get everything set up at once would be quite overwhelming. The GHL system is good when you are used to it, but there is a learning curve to get through until you are comfortable with it.
I would start with the Profilux 3, power bar and sensors (you can start with just the temp sensor). Once you have that sorted then you can add other items. I wouldn’t try to learn all of it at once.
If you can post a picture (or any model numbers on it) of the small box then we can try to identify it.
ProfiLux 3.1T Manual - GHL Advanced Technology
Attachments ProfiLux31T_Manual_2015-03-14 (2 MB)
www.aquariumcomputer.com
I have the 4 which is a bit different. I think trying to get everything set up at once would be quite overwhelming. The GHL system is good when you are used to it, but there is a learning curve to get through until you are comfortable with it.
I would start with the Profilux 3, power bar and sensors (you can start with just the temp sensor). Once you have that sorted then you can add other items. I wouldn’t try to learn all of it at once.
If you can post a picture (or any model numbers on it) of the small box then we can try to identify it.
OP
OP
saltyfins
Valuable Member
we cant hook up anything...other than power. There's no water even in the tank yet. I have a pile of stuff everywhere, just trying to figure this out.This looks like the Profilux 3 manual.
ProfiLux 3.1T Manual - GHL Advanced Technology
Attachments ProfiLux31T_Manual_2015-03-14 (2 MB)
I have the 4 which is a bit different. I think trying to get everything set up at once would be quite overwhelming. The GHL system is good when you are used to it, but there is a learning curve to get through until you are comfortable with it.
I would start with the Profilux 3, power bar and sensors (you can start with just the temp sensor). Once you have that sorted then you can add other items. I wouldn’t try to learn all of it at once.
If you can post a picture (or any model numbers on it) of the small box then we can try to identify it.
1
169468
Guest
If you have the correct power supply (the 12v one), then you should be able to plug that in , and the PowerBar, and start to look through the menus.
If it is lighting up but the buttons aren’t working, then something is odd. If you’ve plugged the 24v doser power supply into it then then can damage the Profilux.
If it is lighting up but the buttons aren’t working, then something is odd. If you’ve plugged the 24v doser power supply into it then then can damage the Profilux.
1
169468
Guest
Just to clarify, the 24v power supplies are for the doser 2 and 2.1. I’m not sure about the older dosers that may have been around at the time of the Profilux 3.
OP
OP
saltyfins
Valuable Member
1404063012 profilux 3.1N eXThis looks like the Profilux 3 manual.
ProfiLux 3.1T Manual - GHL Advanced Technology
Attachments ProfiLux31T_Manual_2015-03-14 (2 MB)
I have the 4 which is a bit different. I think trying to get everything set up at once would be quite overwhelming. The GHL system is good when you are used to it, but there is a learning curve to get through until you are comfortable with it.
I would start with the Profilux 3, power bar and sensors (you can start with just the temp sensor). Once you have that sorted then you can add other items. I wouldn’t try to learn all of it at once.
If you can post a picture (or any model numbers on it) of the small box then we can try to identify it.
1
169468
Guest
No, the connection are shown in the manual that I posted earlier. You should have a 12v ‘brick’ that plugs into the wall. The power bar plugs into the wall. The 2 are connected with a ‘data’ cable.
1
169468
Guest
Have you looked at the manual?
OP
OP
saltyfins
Valuable Member
I dont have one. and online, it basically doesnt show/tell you how to even set it up out of the box. that's what I need...dumbed down step by step...or pictures
1
169468
Guest
Did you download the manual at the link I posted earlier?
There is a photo of the unit and explanations. For example, one line says:
I'm not sure how much more dumbed down it can get!
There is a photo of the unit and explanations. For example, one line says:
I'm not sure how much more dumbed down it can get!
gbroadbridge
5000 Club Member
I would suggest you leave all the profilux stuff in the box for the time being.
You need to get the tank up and stable to start with.
In a few months time, worry about automation as it will be a little clearer then.
You need to get the tank up and stable to start with.
In a few months time, worry about automation as it will be a little clearer then.
OP
OP
saltyfins
Valuable Member
I didnt get the box it came with. I got 38 plugs/cables/adapters in a box. so does that help? I'm not stupid. I just dont have the information that it was shipped with. the guy had this freshwater, and a mess. took it down, literally threw it in a box, and handed it over.
Similar threads
TOP 10 Trending Threads
-
- Sticky
