Heater Brand Mixing

TheReaperOfMars

Active Member
View Badges
Joined
Aug 13, 2017
Messages
268
Reaction score
421
What state or country do you live in
North Carolina
Rating - 0%
0   0   0
I am in the process of setting up my new tank, and by total water volume it will be somewhere around 140 gallons all said. I am trying to pick a heater, and I love my Cobalt Neo-Therm that I have on my 29 gallon, but buying 4 150w Neo-Therms seems a bit silly. I am consider mixing and matching a bit to get the best of both worlds in terms of reliability and accuracy.


With that said, has anyone tried mixing Eheim Jagers with Neo-Therms? Specifically, for 140 gallons of volume with a target temp of 78 degrees, and an ambient temp of around 71 in the room what if I did the following:

2 125W Eheim Jagers set to 80 degrees, which should cover heating around 100 gallons of water
1 150W Cobalt Neo-Therm set to 78 degrees.

The goal here would be for the Jagers to stay on all the time and just be a bit under powered for the tank. Then the Cobalt would provide the fine temperature control as it does a great job with keeping the temperature very precise in my experience. My Jagers in the past have kept my tank within maybe a 1.5 degrees of my set temp, and the Neo-Therm keeps my tank currently within a fraction of a degree.


Does anyone have any feedback on the feasibility of this plan?


Thanks!
 
I had a bear of a time setting up dual heaters without a controller and not have one on all the time. I was also trying to do three - 2 dual and other larger that would control the temp. The amount of fiddling I was doing was insane, so I bought a temp controller (cheap as I'm not overly relying on it). Thought it was a slick idea, just didn't work out during operations the way I wanted. Much happier and feel more secure with what I have in place now.

Happy to share - maybe you'll see improvements.

Original Testing of Heaters

Inkbird setup - end of post

Final design - for now
 
@Quietman Your data is exactly what I am looking for! Some back of the napkin math makes me think for the Eheims you get roughly 1 degree over ambient per 8.5-10 watts on your 45 gallon tank. So on my 140 gallons of water volume I would need something like 25-30 watts per degree over ambient. With my house hovering at 71ish year round, and if I want the Eheims to maintain a temp around 77 degrees, while being set at 80, I would need 150-180 watts of Eheim. I know temperature math doesn't really work like that, so I will have to experiment.

Eheim recommends 1 250w for my water volume. Which is fairly reasonable given that they probably want a margin of error for people that want a cold house and a very warm tank. So 2 75w Eheims, and 1 150w Cobalt would probably give me enough power to do what I want, which is nice, because I already have 1 150w Cobalt.

Am I thinking this will be too easy? I do have an Apex controller, but I would rather let the heaters handle it and have the Apex kill power if it is too much.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new