Had a storm come through and power surge where I lost power for like 5 seconds. The base unit had no light on and seemed dead. I went to unplug aquabus on base unit that connects to EB832 but disconnected the aquabus connected to my FMM (LDK) and the lights on the base unit came back on. Everytime I try to reconnect the FMM the base unit powers off. Thats issue number 1. My equipment plugged into Apex is running in whatever fallback mode I had programmed. More importantly I lost connection to fusion and the base unit has just a solid blue light. I have it hardwired via ethernet to router. Tried resetting mutiple times, reset router, tried connecting to Apex setup wifi and going to http://apex.local and couldn't connect. I tried unplugging power to the Apex and that didnt work. Don't know what else to do... help! Issue 3 is that i plugged my skimmer (RO Regal 150 INT) into a power strip to get it back up running (have programmed as fallback off) and it just hums for 20 seconds and then turns off and the controller blinks red where the 15 and 60 are for feed modes like its stuck on feed mode...
Any and all help would be appreciated ( @SuncrestReef )
Any and all help would be appreciated ( @SuncrestReef )