HELP!!! Profilux setup!

[Gonzo74]

It’s the PAB 5.1 that I am trying to assign

 

[WWIII]

It’s the PAB 5.1 that I am trying to assign

Are both the communication leds lit up on the 5.1? One green and one amber I believe.

 

[Gonzo74]

Yes, one is green and one is Amber.

 

[Gonzo74]

The touch screen PAB is recognized but I had to plug it into a different electric socket. Could not plug it into the power bar.

 

[WWIII]

Can you get a screenshot of what you're looking at on GCC?

 

[WWIII]

The touch screen PAB is recognized but I had to plug it into a different electric socket. Could not plug it into the power bar.

So you've already added the touch using the same method. Hmm... try to unplug the powerbar from the wall, then plug it back in and try to add it real quick in GCC. I'm not at home, so it's a little hard to give advice. That's what I would try. Or try a different pab cable.

 

[Gonzo74]

Can you get a screenshot of what you're looking at on GCC?

Here is what it says now. It picks up the touch screen but not the power bar.

 

[Gonzo74]

Here is what it says now. It picks up the touch screen but not the power bar.

 

[WWIII]

Is the powerbar plugged directly into the p4 or the end of the touch?

 

[Gonzo74]

Directly into the P4

 

[Gonzo74]

Just got off the phone with Vinny. Amazing customer service. I am up and running now.

 

[Gonzo74]

Need help setting up stand alone doser and KH Director to profilux 4.

Will not slow me to assign stand alone doser as a device, nor will it allow me to do a firmware update.

 

[WWIII]

Need help setting up stand alone doser and KH Director to profilux 4.

Will not slow me to assign stand alone doser as a device, nor will it allow me to do a firmware update.

Is this the only kh director you will have assigned to the profilux?

 

[Gonzo74]

Yes, and for now, the only doser, until I buy another one

 

[Gonzo74]

Why would you need more than one KH Director assigned to a profilux?

 

[Brew12]

Why would you need more than one KH Director assigned to a profilux?

A Profilux can control more than one system.

Can you log onto the Doser in stand alone mode?

 

[Gonzo74]

Like, through the USB?

 

[Brew12]

Like, through the USB?

yes

 

[Gonzo74]

Yes, I did that a few times and was able to do a firmware update eventually. But then I go back to assign devise on profilux and it won’t let me. I try to do firmware update again and it won’t let me from profilux.

 

[Gonzo74]

I really love this brand, but man, is it hard to set up