- Joined
- Jan 21, 2020
- Messages
- 175
- Reaction score
- 65
Hey guys so i went ahead and did some preventative maintenance on rodi filter and replaced the cartridges.
Ive got a sediment filter going to a 1 micron carbon block, then an additionap 1 micron carbon block, up to the ro canisters 2x total for 150gpd. After this i have 2x di resin canisters.
My tds meter usually reads 40 IN, 0-1 Out. Output tds meter is placed just before the di canisters.
I just replaced the first sediment and 1 micron carbon blocks, ive ran about 3 gallonsthrough the system and my output tds is still showing at 5- 7tds.
Should i verify alignment of the inline tds meters, or should i keep running water through?
Ive got a sediment filter going to a 1 micron carbon block, then an additionap 1 micron carbon block, up to the ro canisters 2x total for 150gpd. After this i have 2x di resin canisters.
My tds meter usually reads 40 IN, 0-1 Out. Output tds meter is placed just before the di canisters.
I just replaced the first sediment and 1 micron carbon blocks, ive ran about 3 gallonsthrough the system and my output tds is still showing at 5- 7tds.
Should i verify alignment of the inline tds meters, or should i keep running water through?