Help with fishless tank cycling

The_Underwater_Gardener

Community Member
View Badges
Joined
Oct 22, 2018
Messages
33
Reaction score
20
What state or country do you live in
Canada
Rating - 0%
0   0   0
Hello,

I’m pretty sure my tank cycle is stalled. Going on the 3rd week of cycling. Dosed bacteria and ammonia on first day. Been doing sea chem stability since.

Ammonia has been really high 8ppm then 4 ppm after 25% water change.

Nitrates and nitrites have been 0 every time.

Not sure if I should do a big water change or try Dr Tim’s bacteria?

Thank you everyone
 
don't do any water changes during cycle. Add ammonia and bacteria, then be patient and test until nitrites and nitrates rise. Once ammonia and nitrite are zero, you're good to go. Patience is key.
 
Well, the Seachem stability may have stalled things or at least retarded the cycle. Seachem recommends their AmGuard to get the amonia under control. Also, is the water RO/DI? If doing water changes that may have TDS at any level will delay the total cycle.
 
Well, the Seachem stability may have stalled things or at least retarded the cycle. Seachem recommends their AmGuard to get the amonia under control. Also, is the water RO/DI? If doing water changes that may have TDS at any level will delay the total cycle.
Using tap water with seachem prime
 
I sometimes ghost feed the tank. And I love the ammonia badge. I can tell the ammonia is there at a glance. This is your first test to go slow. Nothing good happens fast.
 
Using BioSpira my ammonia solved within four days and nitrites within nine. Carbon dosed after adding some phosphates and got that solved without resorting to a WC. Similar success using One and Only although I didn't track the days to solve and no carbon dosing.

If ammonia truly at 8 ppm then that might be the cause of delay. As mentioned. Stop doing water changes.

Below is an informative discussion at MACNA where I learned and thought I already had this subject covered. One can never stop learning.

 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 12 34.3%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 14.3%
  • Buying the wrong equipment the first time

    Votes: 5 14.3%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 11 31.4%
  • Chasing numbers or making too many changes

    Votes: 3 8.6%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 5 14.3%
  • Poor aquascaping or tank-design decisions

    Votes: 3 8.6%
  • Failing to research an animal’s needs

    Votes: 1 2.9%
  • Trusting bad advice

    Votes: 4 11.4%
  • Doing something on the tank when you should've gone to bed

    Votes: 5 14.3%
  • Something else—tell us below

    Votes: 4 11.4%
  • I’m still waiting for my first expensive lesson!

    Votes: 3 8.6%
Back
Top
Home
Post thread…
Market
What's new