Help with Vibration

Hallowhead

2500 Club Member
View Badges
Joined
Mar 27, 2019
Messages
3,269
Reaction score
1,556
Location
New Jersey
Rating - 0%
0   0   0
Howdy,

I am trying to reduce the vibration on my return line! Not pictured but in the back above the union there is a pipe clamp that keeps the pipe in place against a 2x4. So it's not rattling above that union. When I hold the diagonal pump it gets MUCH quieter, however, not silent. When I have the pump in a 5 gallon bucket it's silent - that is what I am trying to achieve. I was told that a short piece of vinyl tubing will help which i've ordered the parts to try this. It makes me nervous though because I have to change up the plumbing. To avoid cutting and re gluing I am going to get another union and just have two options hard plumbed or vinyl. I am looking for other ways to silence the pump! Any thoughts or ideas are welcome.

IMG_20190630_195352.jpg
 
Here is what it looks like under the water. I have ordered the two barbed to threads so we will see what happens.
IMG_20190630_200630.jpg
 
Howdy,

I am trying to reduce the vibration on my return line! Not pictured but in the back above the union there is a pipe clamp that keeps the pipe in place against a 2x4. So it's not rattling above that union. When I hold the diagonal pump it gets MUCH quieter, however, not silent. When I have the pump in a 5 gallon bucket it's silent - that is what I am trying to achieve. I was told that a short piece of vinyl tubing will help which i've ordered the parts to try this. It makes me nervous though because I have to change up the plumbing. To avoid cutting and re gluing I am going to get another union and just have two options hard plumbed or vinyl. I am looking for other ways to silence the pump! Any thoughts or ideas are welcome.

This is a common issue with hard plumbing the return pump and as you were told (and @Crabs McJones added) a short section of hose is the generally accepted solution (of course, like everything I'm sure that someone will disagree:)). Good luck!
 
I agree with crabs. Sometimes that reinforced tubing is nearly as stiff as pvc. Silicone all the way if you can find it locally.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new