How could I improve this sump?

[Uroplatus]

I have a 45 gallon cube with 6 fish and soft corals Lps and one monti cap. I bought this tank used. Also there’s sponges and tube worms growing on the heater.

 

[monkeyCmonkeyDo]

? What's your question
D

 

[N.Sreefer]

Ditch the rusted metal holding your plumbing in place.

 

[Dburr1014]

I have a 45 gallon cube with 6 fish and soft corals Lps and one monti cap. I bought this tank used. Also there’s sponges and tube worms growing on the heater.

What are you trying to accomplish with the sump?
Change it up? Refuge?
Yes, that rusted clamp needs to go.

 

[monkeyCmonkeyDo]

Did it come with a pump? Id put a downpipe into that filter sock a little bit just submerged. Or it will splash?!
What are those red knobs?
I agree change that metal hose clamp for a plastic one or a good strong zip tie for now.
D

 

[Shon]

Clean the sock.

Are you diligent enough to squeeze that sponge out every now and then? If not, a DIY eggcrate "media rack" could be 1.
You could use said rack for a bag or pantyhose filled with carbon or whatever else.

Just a single float switch? Can't tell if there is also an optical. I'm assuming it's an auto top off. What ATO do you have?

What are those red knobs?

I think that's the heater.

Replace the old heater.

Remove light, add protein skimmer. If that is a regular gallon jug sitting there, should be enough room for a hang on refugium and use the light there.

Just what I would do..

 

[Lavey29]

Looks like enough room to add a skimmer. Maybe some rock rubble or marinepure for extra bio media

 

[monkeyCmonkeyDo]

I think that jug is his or hers auto top off.
Turning it on its side and cutting the side top off and drilling holes would make it a flow through refugium though. I like it. Lol.
D

 

[Uroplatus]

Ditch the rusted metal holding your plumbing in place.

What do use instead?

 

[Uroplatus]

What are you trying to accomplish with the sump?
Change it up? Refuge?
Yes, that rusted clamp needs to go.

I was thinking refugium

 

[monkeyCmonkeyDo]

Your gonna want a nylon hose.clamp
D

 

[monkeyCmonkeyDo]

https://www.partstown.com/fetco/fe1...VtwytBh165A-qEAQYAiABEgJlCvD_BwE&gclsrc=aw.ds
Just need the right size. Lol

 

[Gundy]

Figure out where all the splashing is coming from. Tidy things up a bit and clean and wipe down the entire sump from all the salt. Then show us an after picture.

 

[iLMaRiO]

https://www.partstown.com/fetco/fe1...VtwytBh165A-qEAQYAiABEgJlCvD_BwE&gclsrc=aw.ds
Just need the right size. Lol

i'm the only one unable to open these after closing?

 

[Uroplatus]

Did it come with a pump? Id put a downpipe into that filter sock a little bit just submerged. Or it will splash?!
What are those red knobs?
I agree change that metal hose clamp for a plastic one or a good strong zip tie for now.
D

It did not come with a pump, I used a cheap aqua top one at first but it died so I replaced it with a Simplicity 1000. The red knob is to a cheap heater.

 

[Uroplatus]

Figure out where all the splashing is coming from. Tidy things up a bit and clean and wipe down the entire sump from all the salt. Then show us an after picture.

The sump overflowed a year ago and I’m in a power chair so it’s a little difficult

 

[Dburr1014]

Not a whole lot of room but can be done.

 

[Uroplatus]

Clean the sock.

Are you diligent enough to squeeze that sponge out every now and then? If not, a DIY eggcrate "media rack" could be 1.
You could use said rack for a bag or pantyhose filled with carbon or whatever else.

Just a single float switch? Can't tell if there is also an optical. I'm assuming it's an auto top off. What ATO do you have?


I think that's the heater.

Replace the old heater.

Remove light, add protein skimmer. If that is a regular gallon jug sitting there, should be enough room for a hang on refugium and use the light there.

Just what I would do..

The sock is the to muffle the noise. Which sponge? I have the big Tunze ATO so I have the sensor. How often do you replace heaters and is it normal for sponge and tube worms to grow? So a hang on refugium? Also where do I put a skimmer? Sorry about the punctuation I’m in a chair and it’s hard for me to type

 

[Uroplatus]

I think that jug is his or hers auto top off.
Turning it on its side and cutting the side top off and drilling holes would make it a flow through refugium though. I like it. Lol.
D

It’s soda ash, the ATO is hooked to a 5 gallon bucket. My name is Alex and I am a young man

 

[Uroplatus]

Not a whole lot of room but can be done.

The pods will not be happy