How do I attach media reactor to a 3/4th gate valve manifold?

[christwendt]

Hello. I plan to add a few manifolds off my return line. It’s 3/4th return line. I will be using gate valves for the manifold. How would I attach this brs 1/2 pushing fittings to a 3/4th pvc gate Galve? I plan to use it for carbon.

 

[redfishbluefish]

Simply pick up the adaptors needed to go from 3/4 to quick connect. Here's an example assuming the 3/4 is pvc slip....

You'll need 3/4 slip to 1/2 female NPT and a 1/2 male npt to 1/2 john guest.

 

[christwendt]

Simply pick up the adaptors needed to go from 3/4 to quick connect. Here's an example assuming the 3/4 is pvc slip....

You'll need 3/4 slip to 1/2 female NPT and a 1/2 male npt to 1/2 john guest.

Thank you so much

 

[redfishbluefish]

Also check to see if you can get one adapter going directly from 3/4 to the quick connect.

 

[christwendt]

Also check to see if you can get one adapter going directly from 3/4 to the quick connect.

Definitely will do. I’ll just look through all the plumbing. I saw this on brs. Would this be worth looking into?