Hello, I have a glass corner tank with an acrylic overflow baffle across the back corner (with the toothed top for the water to flow over). There is a small leak where it attaches to one side of the glass which causes my sump to slowly fill during maintenance and outages. I'm wondering if there is any quick patch I can do while I'm doing a water change and the leaky spot is accessible and out of the water?
thank you for any thoughts!
If not, it is a durso pipe back there that comes in through the glass near the top and is just an 90 elbow inside the tank. I might have to turn the elbow straight up so that the tank can't drain down as far in emergencies. If that presents any unseen problems, perhaps someone could point that out to me. Thanks again for any help.
thank you for any thoughts!
If not, it is a durso pipe back there that comes in through the glass near the top and is just an 90 elbow inside the tank. I might have to turn the elbow straight up so that the tank can't drain down as far in emergencies. If that presents any unseen problems, perhaps someone could point that out to me. Thanks again for any help.
