I have just enabled KH Director and everything started flashing blue, yellow and red, what does this mean?

[windemerejack]

I have just enabled my kh director in gcc and when I clicked save everything started to flash blue, yellow and red, when I disabled my kh director it when back to normal blue flashing, what have I done wrong?

 

[windemerejack]

Please help guys, I am at the end of my tether, everything I do something is wrong and this is the last day I will have a chance of doing things for a few weeks, if its not done today its going in the bin, I have truly had enough of this tin pot machine.

 

[mlandscape]

I presume you are aware of the different colour warning combinations - if not here's the link https://www.aquariumcomputer.com/qu...of-the-blink-and-color-codes-of-the-ghl-logo/

The red and yellow combination seems to indicate "Error: Problem with the serial number or security key" Are these showing correct in GCC ?

 

[windemerejack]

Yeah everything seems to be fine, I can use the khd in gcc, ive just calibrated probe, it seems everything is working but its flashing red yellow and blue.
Don't know if it helps but the red sort of fades into yellow whereas the blue and yellow are distinct different flashes, if that makes sense to you.

 

[mlandscape]

I am no expert but I think Blue you could ignore because it does that all the time when connected to MyGHL. Red is Alarm and Yellow is Warning. Is the Alarm red light lit on the P4 ? You could try disconnecting the power from the P4 and then reconnecting to see if clears

 

[Gaël]

Please show a screenshot of your GCC KH Director settings.

 

[windemerejack]

 

[Gaël]

What happen if you "Start a measurement now" ?
Maybe it's just because no measurement was done.

 

[windemerejack]

I was just about to do the first test, ive been following the how to videos.
I will let you know in a moment

 

[windemerejack]

Its going through the motions of testing ok. Pump 2 (reagent pump) is stop/start, is this how its supposed to be?
It still flashing yellow

 

[Gaël]

Its going through the motions of testing ok. Pump 2 (reagent pump) is stop/start, is this how its supposed to be?
It still flashing yellow

Yes It's KH titration

 

[windemerejack]

First test is 14.7, im thinking it could be a bit out, 2 other test kits show 8 dkh.
Ill do another test and see what it comes up with.
Is it best to use 100ml sample water or 80ml sample water?

 

[Gaël]

It's normal, a least 3 tests are needed first time.
80ml is ok, I personally i use 50ml sample water and it work well.

 

[windemerejack]

So everything seems to be working but its still flashing yellow.

 

[Gaël]

So everything seems to be working

And what is the KH value it find?

but its still flashing yellow.

Please show a screenshot of your 3 corresponding Doser settings.

You can also use GHLConnect app on you smartphone/tablet and in notification you will see notification errors/warnings

 

[windemerejack]

1st test 14.1
2nd test 7.1
3rd test still running

 

[windemerejack]

Yellow flashing solved. just connected via app and there is the warning telling me its doser 1, checked it and I didn't tick the do not monitor level checkbox, ive ticked it and its stopped flashing.
Maybe something in the instructions would not go amiss.
GHL Please listen to your customers. You have already lost a sale from me for another full ghl set up, and a sale of an ion director, so how many other sales have you lost because your instructions are basically useless when things don't go as they should? or maybe you just don't care, but I implore you to listen to what people complain about and fix things.

 

[windemerejack]

3rd test 7.2
Just running a fourth.

 

[windemerejack]

4th test 7.2

 

[windemerejack]

5th test 7.3.
Im going to test next with the 7.5 dkh fluid and see if its testing accurately.