I Need some electrical help

[Mike7744]

I have a RODI system that I want to wire in a seloniod valve in to. To control water input.
I use smart outlets to control all of my aquarium devices. Can I in some way connect a valve to a power supply to use with a smart outlet?
I was looking at this on Amazon to use for a valve. Not sure if I can just get a power supply to turn this on when I want.
https://a.co/d/cw982eG
Thanks

 

[lapin]

It does require 12v . You will need a brick to change the a/c current to d/c current

 

[Mike7744]

It does require 12v . You will need a brick to change the a/c current to d/c current

I was looking on Amazon, but couldn't find the right voltage and watts

 

[stupidfishguy]

autotopoff.com/Solenoids/index.html

Or buy one that is 120 volts with the cable already soldered and the 1/4” poly fittings installed

 

[Mike7744]

autotopoff.com/Solenoids/index.html

Or buy one that is 120 volts with the cable already soldered and the 1/4” poly fittings installed

To expensive for my liking. Amazon is your friend:)

 

[HappyFm]

In my opinion, you need a controllable AC power outlet (110V–220V). Then use an adapter to convert AC to DC (12V/24V) and plug it into that outlet. After that, directly connect it to the solenoid valve, and that should be sufficient.