jlanger
Well-Known Member
- Joined
- Jan 6, 2015
- Messages
- 757
- Reaction score
- 1,519
- Location
- New Richmond, WI
- What state or country do you live in
- Wisconsin
Here's a couple of pics from a job I completed at the start of the year for a fellow TCMAS member (and R2R member) Jonty.
The 300DD tank was recessed behind the wall just a bit so I built jambs and trim to cover the wall. Then the lower panel was installed to cover the stand. The upper panel is mounted with a lift hinge system to have access from in front of the tank. The entire back is accessible from a small room that the tank is in; his sump and filtration happens in yet another room.
If you have any questions, I'm sure Jonty wouldn't mind sharing his thoughts.
The 300DD tank was recessed behind the wall just a bit so I built jambs and trim to cover the wall. Then the lower panel was installed to cover the stand. The upper panel is mounted with a lift hinge system to have access from in front of the tank. The entire back is accessible from a small room that the tank is in; his sump and filtration happens in yet another room.
If you have any questions, I'm sure Jonty wouldn't mind sharing his thoughts.
