Hey guys, I haven't done a WC in about 3 months. I've had 30 gallons of IO circulating since that time in a brute can. Out of curiosity I checked alk this morning. Freshly mixed at 1.026, I tend to get an alk around 11 with my current box of salt. After circulating for about 3 mo in a brute can, the SG was 1.030 and alk 8.0 this morning.
I'm wondering if this saltwater is reasonably safe for use for larger water changes. If I wanted to change out 10 to 15 gallons over a given day should there be any reason not to use this water? I keep my tanks alk at 7.5 target. Id adjust the SG back to 1.026 and remeasure alk. It will probably be pretty close. Once the alk has dropped like that in a mixing container, there shouldn't be concern for some opposite reaction when the water hits the tank and has better circulation or change in pH or other measure that would cause the alk in that water to spike back to 11?
I'm wondering if this saltwater is reasonably safe for use for larger water changes. If I wanted to change out 10 to 15 gallons over a given day should there be any reason not to use this water? I keep my tanks alk at 7.5 target. Id adjust the SG back to 1.026 and remeasure alk. It will probably be pretty close. Once the alk has dropped like that in a mixing container, there shouldn't be concern for some opposite reaction when the water hits the tank and has better circulation or change in pH or other measure that would cause the alk in that water to spike back to 11?