Is this enough light?

  • Thread starter Thread starter Dre619
  • Start date Start date
  • Tagged users Tagged users None

Dre619

Community Member
View Badges
Joined
Oct 21, 2021
Messages
95
Reaction score
27
Location
San Diego
What state or country do you live in
California
Rating - 0%
0   0   0
So recently cycled tank a few months ago. Now have a variety of softies and one lobo occupying my tank. I have 40g breeder running with a Fluval 3.0 marine light. My questions is, is this enough light? I am thinking of buying a second one to run along with it. Any ideas? Thought comments thanks!
 
So recently cycled tank a few months ago. Now have a variety of softies and one lobo occupying my tank. I have 40g breeder running with a Fluval 3.0 marine light. My questions is, is this enough light? I am thinking of buying a second one to run along with it. Any ideas? Thought comments thanks!
Do you know the PAR levels in your tank? How are the corals doing? I have T-5’s for my 40g breeder and love them. I’m not familiar with the light you’re using.
 
Hey Dre619,

Here are the PAR readings off my main DT. I use the Fluval Marine 3.0 "only" as a supplemental light to my Orpheks. With that in mind here are some factors that I think should be taken into consideration with the PAR readings provided.

  • Isolated reading from Orpheks (straight reading with ambient lighting off and Orpheks blocked)
  • Around 3~4 inches from front glass, so the reflection adds some minor PAR
  • 2 readings taken: 6 and 9 inches below surface
  • Surface movement pretty glassy with mild flow
  • Taken during peak light setting for this Fluval
  • Light not going through glass top or mesh - straight into the water with no obstruction
  • PAR meter = Apogee MQ-510
Results:
  • 6 inches = ~75 PAR
  • 9 inches = ~56 PAR
Hope that helps. I would recommend adding more light either by upgrading to another brand, but running a second may do it too. Lots of good lighting available in the market.

NOTE: My following pic will be showing my Fluval Marine 3.0 light settings for reference as needed: :)



Screenshot_20211127-174526_FluvalSmart.jpg
 
Hey Dre619,

Here are the PAR readings off my main DT. I use the Fluval Marine 3.0 "only" as a supplemental light to my Orpheks. With that in mind here are some factors that I think should be taken into consideration with the PAR readings provided.

  • Isolated reading from Orpheks (straight reading with ambient lighting off and Orpheks blocked)
  • Around 3~4 inches from front glass, so the reflection adds some minor PAR
  • 2 readings taken: 6 and 9 inches below surface
  • Surface movement pretty glassy with mild flow
  • Taken during peak light setting for this Fluval
  • Light not going through glass top or mesh - straight into the water with no obstruction
  • PAR meter = Apogee MQ-510
Results:
  • 6 inches = ~75 PAR
  • 9 inches = ~56 PAR
Hope that helps. I would recommend adding more light either by upgrading to another brand, but running a second may do it too. Lots of good lighting available in the market.

NOTE: My following pic will be showing my Fluval Marine 3.0 light settings for reference as needed: :)



Screenshot_20211127-174526_FluvalSmart.jpg
Why you run pink and white so low ?
 
Rent a PAR meter and compare your readings to what your corals need
 
What light are you using and at what settings ?
 
I have a 10-gallon cube with two Fluval Marine Nanos. Perfect coverage. Not a shadow.

Also have a Seneye. So in theory I know PAR and PUR ... and they can definitely grow coralline algae top to bottom, left to right, up and down. Yet I am still suspicious of the Fluval lights.

My tank sat and did nothing much until I added Coralline Algae in a Bottle, Copepods and phytoplankton and started dosing Tropic Marin All-For-Reef. Some days I want to add a sand bottom.

Remember a single data point is surely a ...

-Big Mistake
 
So recently cycled tank a few months ago. Now have a variety of softies and one lobo occupying my tank. I have 40g breeder running with a Fluval 3.0 marine light. My questions is, is this enough light? I am thinking of buying a second one to run along with it. Any ideas? Thought comments thanks!
I run the same light on my tank mostly softies,but only as supplemental ( like @brmreefer ) for my two 4 ft T5's , give a bit of shimmer and the programmability for dusk and dawn settings.
 
I run the same light on my tank mostly softies,but only as supplemental ( like @brmreefer ) for my two 4 ft T5's , give a bit of shimmer and the programmability for dusk and dawn settings.

I would like to try t5s and/or MH for a future build myself. If only $ was not an issue. ;)
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 21 25.6%
  • I’d trust someone who knows my tank to choose

    Votes: 8 9.8%
  • I’d rather get a gift card and pick it myself

    Votes: 30 36.6%
  • I’d prefer gear or supplies instead

    Votes: 2 2.4%
  • Please don’t surprise me with livestock

    Votes: 21 25.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new