Is this hose Reef safe?

[Schulks]

This pvc hose is 1/2 the cost and ships in 1 day. Are all pvc hoses reef safe?


https://www.supplyhouse.com/Diversi...YPtUELyUJGVCcO6J4dDGtS5kwfWfv6_RoCjZ8QAvD_BwE

 

[Reefer Reboot]

Your link shows vinyl tubing hose which is safe. PVC hose is also safe.

 

[Blue Ring Octopus]

I am a fan of Eheim tubing, it gets a little confusing on sizing because it is different than here, but the stuff last for a very long time.

 

[BaliReefBox]

same stuff I am using to connect return pump to hard plumbing

 

[WVNed]

Your link shows vinyl tubing hose which is safe. PVC hose is also safe.

They are the same thing
from his link
Applications include: air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflows.

• Non-toxic clear vinyl chloride

and
PVC = poly vinyl chloride

 

[vetteguy53081]

This pvc hose is 1/2 the cost and ships in 1 day. Are all pvc hoses reef safe?


https://www.supplyhouse.com/Diversi...YPtUELyUJGVCcO6J4dDGtS5kwfWfv6_RoCjZ8QAvD_BwE

Ive used this for sump application and is safe to use

 

[JCOLE]

I would just be cautious incase they contain plasticizers which can cause issues.

 

[Schulks]

I am a fan of Eheim tubing, it gets a little confusing on sizing because it is different than here, but the stuff last for a very long time.

This tubing is actually for my water change station to pump water to my tanks. I just can't decide if this will be too soft and kink on the bends.

 

[Schulks]

Ive used this for sump application and is safe to use

Alright thank you for chiming in. This is for pumping water to my aquariums for water changes would this tubing kink really easy on turns?

 

[vetteguy53081]

Alright thank you for chiming in. This is for pumping water to my aquariums for water changes would this tubing kink really easy on turns?

Thats what I use it for

 

[Lost in the Sauce]

This tubing is actually for my water change station to pump water to my tanks. I just can't decide if this will be too soft and kink on the bends.

It's not too soft at all. It is pretty stiff actually.

 

[Malcontent]

It's braided so it's going to be so stiff it'll be a challenge to coil up. Good quality unbraided tubing with thick walls is pretty kink-resistant while still being flexible enough to coil.

 

[Easy1]

I was wondering if this would work for pumping water from a mixing station once you cut the ends off and replace them. It says it’s PVC