Jebao 4-Channel Dosing Pump: Programming Below 1ml / day?

[kobe6710]

Has anyone tried calibrating the Jebao Pump to 10ml instead of 100ml in order to trick the pump into dispensing 0.10 per 1 ml? If so any long term effects?

 

[tbrown]

It might be easier to cut the fluid you're dosing. 9 parts RODI to 1 part of the liquid dose.

Mix a gallon at 118oz of RODI and 12 ounces of the supplement?

 

[kobe6710]

It might be easier to cut the fluid you're dosing. 9 parts RODI to 1 part of the liquid dose.

Mix a gallon at 118oz of RODI and 12 ounces of the supplement?

Very clever I did not think of this thank you. I believe I may be able to configure it to 0.1 ml after doing some research but that is a great idea

 

[Randy Holmes-Farley Verified Community Expert]

It might be easier to cut the fluid you're dosing. 9 parts RODI to 1 part of the liquid dose.

Mix a gallon at 118oz of RODI and 12 ounces of the supplement?

That seems best to me, unless one is dosing unusual products such as AFR that could then allow bacterial degradation once diluted.

 

[tbrown]

My concern with the calibration method would be the pump capabilities. I know some of the Hydros pumps aren't capable of going that slow. Calibrating it down can make them less accurate and the doses more sporadic in the amount they dose.