Keeping alkalinity during alkalinity

  • Thread starter Thread starter mofebubi
  • Start date Start date
  • Tagged users Tagged users None

mofebubi

Community Member
View Badges
Joined
Aug 28, 2021
Messages
32
Reaction score
43
Location
Spain
What state or country do you live in
Other International
Rating - 0%
0   0   0
Hello,
Do you keep your alkalinity stable during your cycling adding CO3 or you just let it down in the nitrification process?
I am right now with high levels of NO2 & NO3 and adding CO3 to keep kh around 7.5-8 dKh but I have doubts if this will delay my cycling because the possible reaction between oxigen from CO3 and bacteria instead of taking this oxygen from NO2 to produce NO3.
I have doubts if this is the reason because I have high levels of NO2 and NO3 from some days ago.
I started cycling on March 10th using fishless fuel (high rates to keep around 5 ppm during one week) and used Fritz 9 bacteria.
Thanks in advance.
 
Hello,
Do you keep your alkalinity stable during your cycling adding CO3 or you just let it down in the nitrification process?
I am right now with high levels of NO2 & NO3 and adding CO3 to keep kh around 7.5-8 dKh but I have doubts if this will delay my cycling because the possible reaction between oxigen from CO3 and bacteria instead of taking this oxygen from NO2 to produce NO3.
I have doubts if this is the reason because I have high levels of NO2 and NO3 from some days ago.
I started cycling on March 10th using fishless fuel (high rates to keep around 5 ppm during one week) and used Fritz 9 bacteria.
Thanks in advance.
In saltwater with KH around 7 - there is no problem for the nitrification process to use CO3 and/or HCO3 as carbon source for the autotrophic nitrification bacteria. In sea water - the nitrification process will not total deplete the water from CO3/HCO3 as it can do in soft fresh water - at least not with the low bio load we normally have.

between oxigen from CO3 and bacteria instead of taking this oxygen from NO2 to produce NO3.
Please - explain this a little - I can´t follow you here

Sincerely Lasse
 
In saltwater with KH around 7 - there is no problem for the nitrification process to use CO3 and/or HCO3 as carbon source for the autotrophic nitrification bacteria. In sea water - the nitrification process will not total deplete the water from CO3/HCO3 as it can do in soft fresh water - at least not with the low bio load we normally have.


Please - explain this a little - I can´t follow you here

Sincerely Lasse
I meant that I wonder that if adding CO3 to rise alkalinity; the denitrification bacteria may take the oxigen from CO3 instead of NO2 and this will give a higher rate of NO2 longer than expected due to that
 
The real easy answer is alkalinity just doesn't matter during the cycling phase. You will see it drop, you can do water changes or dosing if you really want to but there is no harm in simply letting the bacteria do their thing depleting it without any dosing.

Once things settle out and you have 0 nitrites then you can do water changes get things corrected up and begin to add live stock and work in your dosing routine.

The above is based on my roughly 10 years of experience and starting up half a dozen tanks.
 
the denitrification bacteria may take the oxigen from CO3 instead of NO2 and this will give a higher rate of NO2 longer than expected due to that
I´ll think you have missunderstand something. The denitrification is not a startup process. It demand anaerobic conditions and starts from NO3 with - sometimes - NO2 as an intermediate phase before the final N2. It is the final process after NO3 have been formed

Further on - it is not any oxygen from either CO3 or NO2/NO3 that´s being needed in the denitrification process (as an electron acceptor) - it is the whole NO3 molecule that is used as electron acceptor in the anaerobic respiration process if NO3 is available in the water

The CO3/HCO3 content of the water - high or low will not harm the denitrification process (but a very low content will stop the nitrification process in fresh water) In fact the denitrification process rise the pH, hence rice the HCO3/CO3 part of the CO2 chain in the water

But a short answer - adding HCO3/CO3 into seawater will not affect the nitrification (or denitrification) process IMOI

Sincerely Lasse
 
I meant that I wonder that if adding CO3 to rise alkalinity; the denitrification bacteria may take the oxigen from CO3 instead of NO2 and this will give a higher rate of NO2 longer than expected due to that

That does not happen except in extreme low ORP environments where methane is produced. It is not happening in reef tanks to any significant extent.

The decline in alk during cycling is simple production of acid, and is not oxygen removal from CO2 or carbonate.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.8%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 24 36.4%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new