I'm North Idaho. Do you remember Blue Ribbon Pets? They were around in the 80's. I think they closed early 90s maybe.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I moved here in 90 but didn’t get into Salt Water until 97.I'm North Idaho. Do you remember Blue Ribbon Pets? They were around in the 80's. I think they closed early 90s maybe.
I will have to see what I have for the SL1.Hello working on updating and setting up a RKE I would like to know the most current firmware for the SL-1 module. Please and thank you.
Looks like I have version 2.03. It was not updated much after the SLX was released to replace it.Hello working on updating and setting up a RKE I would like to know the most current firmware for the SL-1 module. Please and thank you.
What operating system are you running? May need to try running it in compatibility modeFolks, hi
Is myreef 2.0 still working?
I have tried the download but it installs with some exception error and does not work for me.
WIN10What operating system are you running? May need to try running it in compatibility mode
What are you referring to that is version 1.03? Is it the firmware on the head unit or module or is t the software version of myReef?Hello I have version 01.03 I can’t even setup heater it’s not even showing up as an option I need to update to lastest version?
Hmm,not my forte but a quick check seems to imply you can have multiple versions of .net.I've been looking in this thread for years and I could use some help please.
I'm running myreef 2.0 for many years on a very old laptop that I'm afraid is going to go kaput one day. I tried installing myreef 2.0 on a tablet which I've since found out, doesn't run on a msft surface.
I'm now trying to install on a 1 year old dell laptop running Windows 11 and having install issues. It either doesn't open up when I double click or once I tried to open it via right click and received an error msg about my .NET framework not being correct.
Could somone provide assistance. I love MyReef, just not the fact that its running on a 12 year old laptop
Thanks!
I had wondered that myself, but wasn't sure. Something to think about if I don't come up with something else. Would hate to mess up my daily laptop.Hmm,not my forte but a quick check seems to imply you can have multiple versions of .net.
Multiple versions of .NET on the same server
So I've always known it's okay to run multiple versions of the .NET framework on a single computer (client or server alike). This question, though a bit old, talks about this. A while back, howev...stackoverflow.com
So maybe just install 3.5.
Download .NET Framework 3.5 SP1 | Free official downloads
Downloads for building and running applications with .NET Framework 3.5 SP1. Get web installer, offline installer, and language pack downloads for .NET Framework.dotnet.microsoft.com
Links posted as info .. Usage is up to you
What about running it in compatibility mode? Right click and go to properties and under compatability change it to an older windows version and then run as administratorI've been looking in this thread for years and I could use some help please.
I'm running myreef 2.0 for many years on a very old laptop that I'm afraid is going to go kaput one day. I tried installing myreef 2.0 on a tablet which I've since found out, doesn't run on a msft surface.
I'm now trying to install on a 1 year old dell laptop running Windows 11 and having install issues. It either doesn't open up when I double click or once I tried to open it via right click and received an error msg about my .NET framework not being correct.
Could somone provide assistance. I love MyReef, just not the fact that its running on a 12 year old laptop
Thanks!
I had wanted to try that, but when I bring up the Properties tab when right clicking to open, it doesn't have the option to run in Combatibility mode? Running Win 11.What about running it in compatibility mode? Right click and go to properties and under compatability change it to an older windows version and then run as administrator
The SL1 should have two ports and one should be open.Hello group. I'm new here and just setting up a used tank that I purchased a few days ago. The equipment includes a DA controller, (2) PC 4's power strips and a SL1. I do have the USB dongle and have installed the PC based MrReef software which seems to have loaded correctly on my Win10 (under VM Fusion) OS. I can see the SID, but have not connected the phone wire to my Reefkeeper yet. Here is the question. There are not open ports on the PC4's. The controller goes to the 1st PC4, then another wire goes from the 1st PC4 to the 2nd. From the second PC4, a wire goes to the SL1. So, where do I connect the SID? Should I remove the SL1 cable and plug into the 2nd PC4? If so, how will the system know a SL1 is installed or is that simply done manually in the configuration?
Thanks in advance to any/all who can help out.
Well it has a iTemp plugged in, but I removed it to do the programming. I have programmed the unit, but having one problem. Can't get the Standby function to work. I have programmed 0:30:00 for the standby time, and set (3) channels to turn "OFF" when in standby mode. None of the channels turn off when I activate standby. Also, the display shows "STANDBY" by it does not count down from 30:00. When I use PC to activate Standby, it shows active, but the timer shows 00:00:00. Very strange. Any ideas or suggestions would be great. I have rebooted, but have not done factory reset.The SL
The SL1 should have two ports and one should be open.
if you have a iTemp you must have a RKL. The Archon also uses a iTemp but it has 4 bus ports and does not work with myReef other than programing firmware to any modules you might have with the Archon. The RKE cannot use an iTemp only the normal temp probe that connect to the temp port on a SL1, SL2 or SLX modules. If you can find a RKM-HUB module it has 5 bus ports on it so that will allow you to hook up the iTemp and the SID also.Well it has a iTemp plugged in, but I removed it to do the programming. I have programmed the unit, but having one problem. Can't get the Standby function to work. I have programmed 0:30:00 for the standby time, and set (3) channels to turn "OFF" when in standby mode. None of the channels turn off when I activate standby. Also, the display shows "STANDBY" by it does not count down from 30:00. When I use PC to activate Standby, it shows active, but the timer shows 00:00:00. Very strange. Any ideas or suggestions would be great. I have rebooted, but have not done factory reset.
*** UPDATE *** Finally figured it out and feel dumb. Not only do I have to press Standby, but then I have to press the enter button on the head unit. Now works perfectly.