Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
.04. Was up to .10 at one pointThe only thing I noticed weird was my hammer was still extending but the hammers became micro sized over the couple weeks. Never seen one do that
Look like you might be right. If I use the Milwaukee phosphate meter and the Red Sea they read 0. I was trusting the Hanna ultra low and it was reading .10. Pretty sure all the 0 readings are correct. Got the Nyos pro phosphate and it reads 0 alsoThey look hungry to me.
What’s phosphate run at?
Only Hanna ULR for phosphate or phosphorus. Make sure the cuvettes are clean inside & out.Look like you might be right. If I use the Milwaukee phosphate meter and the Red Sea they read 0. I was trusting the Hanna ultra low and it was reading .10. Pretty sure all the 0 readings are correct. Got the Nyos pro phosphate and it reads 0 also
Yeah I do. I’m very cautious with that. Don’t know why it won’t read right. I even used the test fluid and it shows accurate. I’ve been doing this quite a lot of years but still fall for faulty tests at times.Only Hanna ULR for phosphate or phosphorus. Make sure the cuvettes are clean inside & out.
I have to dose 5ml Neophos daily in my 180g to maintain 15-30ppm, currently holding at 20ppb or 0.06ppm.Look like you might be right. If I use the Milwaukee phosphate meter and the Red Sea they read 0. I was trusting the Hanna ultra low and it was reading .10. Pretty sure all the 0 readings are correct. Got the Nyos pro phosphate and it reads 0 also
I started dosing neo phos yesterday. Going to recheck today. The original Hanna phosphate checked the low range not ULR also agreed with 0. I’m happy the High dollar Milwaukee pro one is accurate though. I guess I should have trusted the manuals tests and the pro Milwaukee more than the Hanna ULR. Hopefully I will start seeing some improvementI have to dose 5ml Neophos daily in my 180g to maintain 15-30ppm, currently holding at 20ppb or 0.06ppm.
Two weeks after bumping, colour and PE returned.
Perfect.I started dosing neo phos yesterday. Going to recheck today. The original Hanna phosphate checked the low range not ULR also agreed with 0. I’m happy the High dollar Milwaukee pro one is accurate though. I guess I should have trusted the manuals tests and the pro Milwaukee more than the Hanna ULR. Hopefully I will start seeing some improvement
Totally fine. I run my my tank at 1.030 and without issue.Next question. Got a salinity calibration fluid and found the Milwaukee meter that I thought was reading high is actually accurate and my salinity is 1.027 or 36 ppt. Can this cause my issue
While I cannot explain why the Hanna ULR isn't "working", if you really are 0 in PO4 I would definitely start there.I started dosing neo phos yesterday. Going to recheck today. The original Hanna phosphate checked the low range not ULR also agreed with 0. I’m happy the High dollar Milwaukee pro one is accurate though. I guess I should have trusted the manuals tests and the pro Milwaukee more than the Hanna ULR. Hopefully I will start seeing some improvement